Drive Belt/Wear From Sprocket Debris

< Drive Belt
Revision as of 00:55, 4 December 2019 by BrianTRice (talk | contribs) (extract from service manual)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Revision as of 00:55, 4 December 2019 by BrianTRice (talk | contribs) (extract from service manual)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Wear debris from the tire or the road can accumulate on sprocket teeth, putting pressure on the belt which can wear it out faster.

Recommendation
Keep the sprocket teeth clean to minimize wear on the belt.
A non-abrasive brush should be effective.