5,366
edits
Changes
Created page with "<onlyinclude> ;Fork Oil Level Note: : Measure from outer tube end to oil surface (Condition: spring, spring joint, spring collar, seat rubber, slider, fork bolt are removed a..."
<onlyinclude>
;Fork Oil Level Note:
: Measure from outer tube end to oil surface (Condition: spring, spring joint, spring collar, seat rubber, slider, fork bolt are removed and dust seal touches axle holder)
;Reference
: [http://electricmotorcycleforum.com/boards/index.php?topic=4929 FastAce fork oil change / spring replacement]+ [http://electricmotorcycleforum.com/boards/index.php?topic=5323 part 2] by Ray Ivers
; Tools
* 7mm Allen wrench for riser bolts.
; Steps
# Put the motorcycle on a stand.
# Remove the risers and handlebars using a 7mm Allen wrench.
# Loosen the fork caps, front axle, and brake caliper bolts while the front wheel is on the ground.
# Fork cap / spring removal...
# Oil change...
# Fork spring / cap replacement...
;Notes
{| class="wikitable"
|+Torques
!What
!Torque
!Bolt
|-
!Handlebar clamps
|15 ft/lb
|M8
|-
!Handlebar risers
|25 ft/lb
|M10
|-
!Triple clamps (all)
|15 ft/lb
|M8
|-
!Fork caps
|15 ft/lb
|M46
|-
!F caliper bolts
|18 ft/lb
|M8
|-
!F axle end cap
|15 ft/lb
|M8
|-
!F Axle clamps
|9 ft/lb
|M6
|}
</onlyinclude>
[[Category:Procedure]]
[[Category:Maintenance]]
;Fork Oil Level Note:
: Measure from outer tube end to oil surface (Condition: spring, spring joint, spring collar, seat rubber, slider, fork bolt are removed and dust seal touches axle holder)
;Reference
: [http://electricmotorcycleforum.com/boards/index.php?topic=4929 FastAce fork oil change / spring replacement]+ [http://electricmotorcycleforum.com/boards/index.php?topic=5323 part 2] by Ray Ivers
; Tools
* 7mm Allen wrench for riser bolts.
; Steps
# Put the motorcycle on a stand.
# Remove the risers and handlebars using a 7mm Allen wrench.
# Loosen the fork caps, front axle, and brake caliper bolts while the front wheel is on the ground.
# Fork cap / spring removal...
# Oil change...
# Fork spring / cap replacement...
;Notes
{| class="wikitable"
|+Torques
!What
!Torque
!Bolt
|-
!Handlebar clamps
|15 ft/lb
|M8
|-
!Handlebar risers
|25 ft/lb
|M10
|-
!Triple clamps (all)
|15 ft/lb
|M8
|-
!Fork caps
|15 ft/lb
|M46
|-
!F caliper bolts
|18 ft/lb
|M8
|-
!F axle end cap
|15 ft/lb
|M8
|-
!F Axle clamps
|9 ft/lb
|M6
|}
</onlyinclude>
[[Category:Procedure]]
[[Category:Maintenance]]
