5,366
edits
Changes
errata
<onlyinclude>
This fuse protects low power loads on the battery B+ bus.
;Loads
* [[DC-DC 12V Converter]]
* [[MBB]]
;Specifications
: SPT3.15A 5×20mm
;Removal
* De-energize the bike (key off and unplug external charging sources).
* Uncover the fuse
*: [[SDS Platform]]: [[SDS Platform/Seat Removal|remove the seat]].
*: [[XMX Platform]]: Uncover the left panel under the battery compartment.
* Twist the cap counterclockwise (CCW) and pull.
* Cover the inlet as appropriate to avoid fault possibilities.
;Fuse Holder
: FPG2, [https://www.digikey.com/products/en?keywords=3101.0325 Schurter part no 3101.0325] via DigiKey
;References
* [https://www.facebook.com/groups/zmcowners/permalink/3031005703635284/ I need the fuse holder cap for the fuse located in the picture.]
</onlyinclude>
[[Category:HV Component]]
This fuse protects low power loads on the battery B+ bus.
;Loads
* [[DC-DC 12V Converter]]
* [[MBB]]
;Specifications
: SPT3.15A 5×20mm
;Removal
* De-energize the bike (key off and unplug external charging sources).
* Uncover the fuse
*: [[SDS Platform]]: [[SDS Platform/Seat Removal|remove the seat]].
*: [[XMX Platform]]: Uncover the left panel under the battery compartment.
* Twist the cap counterclockwise (CCW) and pull.
* Cover the inlet as appropriate to avoid fault possibilities.
;Fuse Holder
: FPG2, [https://www.digikey.com/products/en?keywords=3101.0325 Schurter part no 3101.0325] via DigiKey
;References
* [https://www.facebook.com/groups/zmcowners/permalink/3031005703635284/ I need the fuse holder cap for the fuse located in the picture.]
</onlyinclude>
[[Category:HV Component]]
