Gen2/Motor Mounting

From Unofficial Zero Manual
< Gen2
Revision as of 22:13, 18 January 2020 by BrianTRice (talk | contribs) (extract from service manual)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

On the motor there are 8 M8 bolts holding the motor in place: 4 on the drive side, 4 on the rear side.

Those bolts only have about 12Nm of torque on them.
References
Burton's 2013 to 2014 motor swap thread shows the most detail about the physical mounting of the motor.