5,366
edits
Changes
no edit summary
<onlyinclude>
The steering head is the tube in the head position of the frame that mounts the fork steerer tube.
For 2014+ S and X-platform Zeros, the inner diameter of the steering head is 55mm for a steering tube size of 1in (25.4mm).
;Steering head fastener stack (top to bottom)
# Steering Stem Thin Nut (M27⨉1.5mm, 8mm depth); apply a 41mm hex socket.
# Washer 41 - 27.5mm⌀, 2mm thickness (reportedly not present on 2018+ models)
# Steering Stem Lock Nut (M30⨉1.5mm)
# Bearing Lip Seal (55mm OD)
# [[Gen2/Steering Head Bearing|Steering Head Bearing]] (facing up)
# Lower Triple Clamp Assembly Tube
# [[Gen2/Steering Head Bearing|Steering Head Bearing]] (facing down)
# Bearing Lip Seal (55mm OD)
</onlyinclude>
[[Category:Structural Component]]
The steering head is the tube in the head position of the frame that mounts the fork steerer tube.
For 2014+ S and X-platform Zeros, the inner diameter of the steering head is 55mm for a steering tube size of 1in (25.4mm).
;Steering head fastener stack (top to bottom)
# Steering Stem Thin Nut (M27⨉1.5mm, 8mm depth); apply a 41mm hex socket.
# Washer 41 - 27.5mm⌀, 2mm thickness (reportedly not present on 2018+ models)
# Steering Stem Lock Nut (M30⨉1.5mm)
# Bearing Lip Seal (55mm OD)
# [[Gen2/Steering Head Bearing|Steering Head Bearing]] (facing up)
# Lower Triple Clamp Assembly Tube
# [[Gen2/Steering Head Bearing|Steering Head Bearing]] (facing down)
# Bearing Lip Seal (55mm OD)
</onlyinclude>
[[Category:Structural Component]]
