5,366
edits
Changes
link update
<onlyinclude>
The swingarm is a dual-sided structure made in the same way as the [[Frame|frame]]. It's very sturdily constructed for its light weight.
[[File:Onlift.jpeg|thumb|Swingarm]]
The front pivots on the axis of the [[Motor|motor]] to minimize [[Drive Belt|belt]] strain with suspension travel.
It has fitments for the [[Gen2/Rear Axle|rear axle]] including belt tension adjustment.
;Mounting
: The swingarm joins the frame at left and right pivot points.
: The each side pivot has a stack of (from outside inward):
:* A rubber cover
:* A bolt with a 10mm hex drive.
:* The bearing (6204; 6204RS for 2015+ models)
</onlyinclude>
===[[Gen2/Swingarm Tube|Swingarm Tube]]===
{{:Gen2/Swingarm Tube}}
===[[Gen2/Swingarm Bearings|Swingarm Bearings]]===
{{:Gen2/Swingarm Bearings}}
===[[Gen2/Swingarm Removal|Swingarm Removal]]===
{{:Gen2/Swingarm Removal}}
[[Category:Component]]
The swingarm is a dual-sided structure made in the same way as the [[Frame|frame]]. It's very sturdily constructed for its light weight.
[[File:Onlift.jpeg|thumb|Swingarm]]
The front pivots on the axis of the [[Motor|motor]] to minimize [[Drive Belt|belt]] strain with suspension travel.
It has fitments for the [[Gen2/Rear Axle|rear axle]] including belt tension adjustment.
;Mounting
: The swingarm joins the frame at left and right pivot points.
: The each side pivot has a stack of (from outside inward):
:* A rubber cover
:* A bolt with a 10mm hex drive.
:* The bearing (6204; 6204RS for 2015+ models)
</onlyinclude>
===[[Gen2/Swingarm Tube|Swingarm Tube]]===
{{:Gen2/Swingarm Tube}}
===[[Gen2/Swingarm Bearings|Swingarm Bearings]]===
{{:Gen2/Swingarm Bearings}}
===[[Gen2/Swingarm Removal|Swingarm Removal]]===
{{:Gen2/Swingarm Removal}}
[[Category:Component]]