5,366
edits
Changes
dimensions
<onlyinclude>
Zero's models all steer with a [[wikipedia:Motorcycle_handlebar|handlebar]].
: S/SR and FXS models share a shorter, sportier handlebar shape.
: DS/DSR and FX models share a wider, straighter handlebar shape.
: Both S/FXS and DS/FX style handlebars are standard through-bars.
;Diameters
* 1 1/8" (28mm) ⌀ center bar.
* 7/8" (22mm) ⌀ outer bar.
{| class="wikitable"
|+Dimensions
!Models
!Years
!Width
!Rise
!Pullback
|-
|S,SR,FXS
|2013-present
|
|
|
|-
|DS,DSR,FX
|2013-present
|
|
|
|-
|SRF,SRS
|2020-present
|
|
|
|}
;Control-Indexing Holes
* (1) 3/16" ⌀ on the left for the switchgear, 6.5" from the end of the bar.
* (1) 3/16" ⌀ on the ''right inner'' for the [[Throttle|throttle]], 7 3/16" from the bar end.
* (1) 5/32" ⌀ on the ''right outer'' for the switches, 6" from the bar end.
;References
* [https://www.electricmotorcycleforum.com/boards/index.php?topic=10043 Changing to non OEM handlebars (‘15 FX)]
===Handlebar Clamps===
: The SDS and XMX platform handlebar clamps are 2" by 1 1/8" (28mm) for the entire line of models, clamped with M10 cap screw bolts (35mm length; possibly 50mm?).
===Handlebar Switch Assemblies===
: The switch assemblies are fastened with TT20 (1/4") tamper-resistant Torx bolts through the underside.
===Handgrips===
Handgrips have a Zero logo on them but otherwise are reasonably good stock grips for the 7/8" (22mm) handlebar width at the end of the bars.
===Bar Ends===
For 2014+ models, any bar end accessories that match the 14mm inner diameter will fit.
: [[File:2016_end_plugs.png|thumb|2014+ stock bar end plugs]]
: The stock bar ends are round plastic bumpers held in by plastic threads, so can be removed with a little twisting and pulling.
;2013 models
: Bar ends are covered by the grip so are not easily changed without changing the grips.
: Zero did offer heated grips for these models but dropped them after changing the bars in 2014.
</onlyinclude>
[[Category:Component]]
Zero's models all steer with a [[wikipedia:Motorcycle_handlebar|handlebar]].
: S/SR and FXS models share a shorter, sportier handlebar shape.
: DS/DSR and FX models share a wider, straighter handlebar shape.
: Both S/FXS and DS/FX style handlebars are standard through-bars.
;Diameters
* 1 1/8" (28mm) ⌀ center bar.
* 7/8" (22mm) ⌀ outer bar.
{| class="wikitable"
|+Dimensions
!Models
!Years
!Width
!Rise
!Pullback
|-
|S,SR,FXS
|2013-present
|
|
|
|-
|DS,DSR,FX
|2013-present
|
|
|
|-
|SRF,SRS
|2020-present
|
|
|
|}
;Control-Indexing Holes
* (1) 3/16" ⌀ on the left for the switchgear, 6.5" from the end of the bar.
* (1) 3/16" ⌀ on the ''right inner'' for the [[Throttle|throttle]], 7 3/16" from the bar end.
* (1) 5/32" ⌀ on the ''right outer'' for the switches, 6" from the bar end.
;References
* [https://www.electricmotorcycleforum.com/boards/index.php?topic=10043 Changing to non OEM handlebars (‘15 FX)]
===Handlebar Clamps===
: The SDS and XMX platform handlebar clamps are 2" by 1 1/8" (28mm) for the entire line of models, clamped with M10 cap screw bolts (35mm length; possibly 50mm?).
===Handlebar Switch Assemblies===
: The switch assemblies are fastened with TT20 (1/4") tamper-resistant Torx bolts through the underside.
===Handgrips===
Handgrips have a Zero logo on them but otherwise are reasonably good stock grips for the 7/8" (22mm) handlebar width at the end of the bars.
===Bar Ends===
For 2014+ models, any bar end accessories that match the 14mm inner diameter will fit.
: [[File:2016_end_plugs.png|thumb|2014+ stock bar end plugs]]
: The stock bar ends are round plastic bumpers held in by plastic threads, so can be removed with a little twisting and pulling.
;2013 models
: Bar ends are covered by the grip so are not easily changed without changing the grips.
: Zero did offer heated grips for these models but dropped them after changing the bars in 2014.
</onlyinclude>
[[Category:Component]]
