Changes

Jump to: navigation, search

MBB Hardware Reset

944 bytes added, 17:45, 22 April 2020
multi-platform support
<onlyinclude>
This is a fallback procedure for when the vehicle is disabled and a [[BMS Reset]] has already been fully attempted with no success.

;Steps
# Turn off the vehicle fully.
# Access the MBB:
#* [[SDS Platform]]: [[SDS Platform/Seat Removal|Remove the seat]].
#* [[XMX Platform]]: Uncover the left panel below the battery compartment.
#* [[FST Platform]]: Remove the tank.
# Pull the two multi-pin cables off of the [[MBB]].
# Wait a while (30 seconds, say).
# Reconnect the two multi-pin cables to the MBB.
#: Ensure the cables are fully seated and locked into place.
# Re-test by powering the bike on.
# Correct the MBB internal clock/date as necessary.

</onlyinclude>

;References
: [http://electricmotorcycleforum.com/boards/index.php?topic=8926.msg76547#msg76547 "After pulling the two cables on the Main Bike Board (MBB) 30 secs the contractor closed en all worked well again."]

[[Category:Diagnostics]]
[[Category:Procedure]]

Navigation menu