Changes

Jump to: navigation, search

Mirrors

1,183 bytes added, 21:17, 23 June 2020
list subpages
<onlyinclude>
{|
|[[File:mirror-side-2012-ds.png|thumb|2012-2014 Mirrors (side) on a DS]]
|[[File:mirror-side-2016-dsr.png|thumb|2015+ mirrors (side) on a DSR]]
|}
;Design
: Pre-2015 ([[Gen1]]) Zeros use an angular mirror with a ball mount joint that allows rotating the mirrors 360 degrees.
:: Many riders turn the mirrors upside down for a little wider visibility around the shoulder/arms.
: 2015+ ([[Gen2]] and [[Gen3]]) Zeros use a mirror stalk with an inboard ball mount with about 30 degrees of freedom from the stalk.

;Mount
: Zero mirrors are mounted from the handlebars with Yamaha/Ducati-style bolt fitting.
: The bolt/thread specification is M10x1.25, left-hand-threaded on the right side and standard right-hand-threaded on the left side.

;Maintenance
: (pre-2015) Check that the set screw holding mirror position holds it firmly.
: Use a corrosion inhibitor or thread-locker for the set screws and the mount threading since these are weather-exposed.

See [[Common_Modifications#Third-Party_Mirrors|Third-Party Mirrors]] for workable/tested replacements.
</onlyinclude>

{{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}

[[Category:Component]]

Navigation menu