Open main menu

Motor Commissioning

Revision as of 23:42, 3 December 2019 by BrianTRice (talk | contribs) (extract from service manual)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Revision as of 23:42, 3 December 2019 by BrianTRice (talk | contribs) (extract from service manual)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Motor commissioning refers to aligning the controller's sine wave programming against the motor using its position sensors.

Benefits
Maximum efficiency (avoids current applied wastefully)
Avoid any slippage.
Avoid misapplied torque which might wear on the bearings.
Retrieved from "http://zeromanual.com/index.php?title=Motor_Commissioning&oldid=5111"
Last edited on 3 December 2019, at 23:42