5,366
edits
Changes
no edit summary
This installs the [http://www.zeromotorcycles.com/shop/index.php?main_page=product_info&cPath=15_2&products_id=231 OEM Rain Guard] on an S-platform Zero model.
<onlyinclude>
;Video Walkthrough
: [https://www.youtube.com/watch?v=lUf2jQJ8log How to install the Zero rain guard on your motorcycle] by [https://www.youtube.com/channel/UCLZ9tcCrr_bq2tSdJ_a-0eg "Dump the Pump" on YouTube]:
:* {{#ev:youtube|lUf2jQJ8log}}
;Difficulty and Time Estimate
: Easy / less than 1 hour.
;Parts and tools
* Rain guard kit
* Optional washers
* License plate bolts long enough to add the rain guard
* Phillips head (PH1) screw driver (not a bit driver), wrenches or screw driver for the license plate hardware.
;Steps
# Remove the license plate.
# Peel off the red reflector above the license plate.
# Back out, clean, and save the three screws under the reflector to remove the reflector bracket.
# Put the rain guard in place with the wide tabs lined up with the top holes of the license plate frame.
# Locate two recessed Phillips head screws under the tail that are in line with the narrow-spaced holes at the front of the rain guard and remove.
# Make sure the wires feeding the turn signals are in the forward notch on the rain guard.
# Put the white spacers in the kit into the recessed tail holes and secure the front of the rain guard using the supplied long screws.
#: Optionally add washers to the underside of the rain guard before inserting the screws.
# Attach the new reflector bracket and apply the new reflectors.
# Attach the two wide tabs to the back of the license plate support using the license plate bolts while reinstalling the plate.
;References
* [https://www.facebook.com/groups/zmcowners/permalink/1034730986596109/ Photos of installation on Facebook]
* [http://electricmotorcycleforum.com/boards/index.php?topic=5868.msg44779#msg44779 Forum post]
</onlyinclude>
[[Category:Install]]
<onlyinclude>
;Video Walkthrough
: [https://www.youtube.com/watch?v=lUf2jQJ8log How to install the Zero rain guard on your motorcycle] by [https://www.youtube.com/channel/UCLZ9tcCrr_bq2tSdJ_a-0eg "Dump the Pump" on YouTube]:
:* {{#ev:youtube|lUf2jQJ8log}}
;Difficulty and Time Estimate
: Easy / less than 1 hour.
;Parts and tools
* Rain guard kit
* Optional washers
* License plate bolts long enough to add the rain guard
* Phillips head (PH1) screw driver (not a bit driver), wrenches or screw driver for the license plate hardware.
;Steps
# Remove the license plate.
# Peel off the red reflector above the license plate.
# Back out, clean, and save the three screws under the reflector to remove the reflector bracket.
# Put the rain guard in place with the wide tabs lined up with the top holes of the license plate frame.
# Locate two recessed Phillips head screws under the tail that are in line with the narrow-spaced holes at the front of the rain guard and remove.
# Make sure the wires feeding the turn signals are in the forward notch on the rain guard.
# Put the white spacers in the kit into the recessed tail holes and secure the front of the rain guard using the supplied long screws.
#: Optionally add washers to the underside of the rain guard before inserting the screws.
# Attach the new reflector bracket and apply the new reflectors.
# Attach the two wide tabs to the back of the license plate support using the license plate bolts while reinstalling the plate.
;References
* [https://www.facebook.com/groups/zmcowners/permalink/1034730986596109/ Photos of installation on Facebook]
* [http://electricmotorcycleforum.com/boards/index.php?topic=5868.msg44779#msg44779 Forum post]
</onlyinclude>
[[Category:Install]]