5,366
edits
Changes
link update
This removes the [[Rider Footpegs|rider footpegs]] from 2012+ S and X-Platform models.
<onlyinclude>
[[File:footpeg-retaining.jpeg|thumb|150px|footpeg retaining clip and tool]]
;Tools
* Snap Ring / E-Ring pliers (needlenose pliers are a common if less easy substitute).
* (Optional) 7mm Allen key to remove the clevis bracket from the frame.
;Steps
# Gently spread the gap in the retaining E-ring using the pliers until it slides over the end of the pin, and remove it.
#: This clip is on the lower end of the footpeg retaining pin.
# Pull the retaining pin up and out.
#: Hold and pull the pin spring and footpeg as the pin comes out.
# (Optional) Use the 7mm Allen key to remove the bolt through the clevis bracket that fastens it to the frame.
;References
: [https://www.youtube.com/watch?v=9OdBkfS_qbs How to Remove Zero Footpegs + Relocation Ideas] by NewZeroLand on Youtube
: {{#ev:youtube|9OdBkfS_qbs}}
</onlyinclude>
[[Category:Procedure]]
[[Category:Teardown]]
<onlyinclude>
[[File:footpeg-retaining.jpeg|thumb|150px|footpeg retaining clip and tool]]
;Tools
* Snap Ring / E-Ring pliers (needlenose pliers are a common if less easy substitute).
* (Optional) 7mm Allen key to remove the clevis bracket from the frame.
;Steps
# Gently spread the gap in the retaining E-ring using the pliers until it slides over the end of the pin, and remove it.
#: This clip is on the lower end of the footpeg retaining pin.
# Pull the retaining pin up and out.
#: Hold and pull the pin spring and footpeg as the pin comes out.
# (Optional) Use the 7mm Allen key to remove the bolt through the clevis bracket that fastens it to the frame.
;References
: [https://www.youtube.com/watch?v=9OdBkfS_qbs How to Remove Zero Footpegs + Relocation Ideas] by NewZeroLand on Youtube
: {{#ev:youtube|9OdBkfS_qbs}}
</onlyinclude>
[[Category:Procedure]]
[[Category:Teardown]]
