5,366
edits
Changes
m
BrianTRice moved page 12V Accessory Socket Kit Install (S Platform) to SDS Platform/12V Accessory Socket Kit Install
<onlyinclude>
This installs [http://www.zeromotorcycles.com/shop/index.php?main_page=product_info&products_id=206 12V Accessory Socket Kit] for 2014+ S Platform models.
: [http://www.zeromotorcycles.com/shop/index.php?main_page=product_info&products_id=193 12V Accessory Wiring Harness] for 2013+ S Platform models also applies.
;Reference Video
* [https://www.youtube.com/watch?v=vRN2ZtbXeNw AIKI Rob's Zero DSR usb accessory and helmet mods]:
*: {{#ev:youtube|vRN2ZtbXeNw}}
;Steps
# Loosen collet from accessory kit and set aside
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_pnandremovekitcollet.jpg|thumb|none|12V accessory kit with loosened collet]]
# Remove rubber blank from the right-side plastic shoulder piece around the instrument cluster.
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_removerubberplugblank.jpg|thumb|none|12V port rubber blank removed from the shoulder piece]]
#: This is now an extra part you will not be needing while the accessory power kit is installed.
# Feed the wire assembly through the hole in dash and align the 12v socket key into the keyway of the hole in the dash.
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_feedassyinhole.jpg|thumb|none|wire fed through hole]][[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_alignassyinhole.jpg|thumb|none|port aligned in hole]]
#: You may want to undo the right-hand turn signal light 2x 3mm mushroom socket head bolts, to get better access and visibility.
# Return collet over wire assembly and rotate to fasten the 12v socket into place.
#: Take care not to pinch the turn signal wires.
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_threadcollettoassy.jpg|thumb|none|collet along wires]]
# Route wires to left-hand side and into compartment.
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_routeassywires.jpg|thumb|none|routing the wires across to the left]]
# Remove rubber protective boot from Sumitomo socket and connect to 12v accessory socket wiring Sumitomo plug.
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_locatesumitomo.jpg|thumb|none|Sumitomo location]][[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_connectsumitomo.jpg|thumb|none|Sumitomo connected]]
# Button up everything. You are done!
</onlyinclude>
[[Category:Install]]
[[Category:12V Electrical Procedure]]
This installs [http://www.zeromotorcycles.com/shop/index.php?main_page=product_info&products_id=206 12V Accessory Socket Kit] for 2014+ S Platform models.
: [http://www.zeromotorcycles.com/shop/index.php?main_page=product_info&products_id=193 12V Accessory Wiring Harness] for 2013+ S Platform models also applies.
;Reference Video
* [https://www.youtube.com/watch?v=vRN2ZtbXeNw AIKI Rob's Zero DSR usb accessory and helmet mods]:
*: {{#ev:youtube|vRN2ZtbXeNw}}
;Steps
# Loosen collet from accessory kit and set aside
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_pnandremovekitcollet.jpg|thumb|none|12V accessory kit with loosened collet]]
# Remove rubber blank from the right-side plastic shoulder piece around the instrument cluster.
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_removerubberplugblank.jpg|thumb|none|12V port rubber blank removed from the shoulder piece]]
#: This is now an extra part you will not be needing while the accessory power kit is installed.
# Feed the wire assembly through the hole in dash and align the 12v socket key into the keyway of the hole in the dash.
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_feedassyinhole.jpg|thumb|none|wire fed through hole]][[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_alignassyinhole.jpg|thumb|none|port aligned in hole]]
#: You may want to undo the right-hand turn signal light 2x 3mm mushroom socket head bolts, to get better access and visibility.
# Return collet over wire assembly and rotate to fasten the 12v socket into place.
#: Take care not to pinch the turn signal wires.
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_threadcollettoassy.jpg|thumb|none|collet along wires]]
# Route wires to left-hand side and into compartment.
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_routeassywires.jpg|thumb|none|routing the wires across to the left]]
# Remove rubber protective boot from Sumitomo socket and connect to 12v accessory socket wiring Sumitomo plug.
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_locatesumitomo.jpg|thumb|none|Sumitomo location]][[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401_connectsumitomo.jpg|thumb|none|Sumitomo connected]]
# Button up everything. You are done!
</onlyinclude>
[[Category:Install]]
[[Category:12V Electrical Procedure]]