Changes

Jump to: navigation, search

SDS Platform/Belly Pan

1,272 bytes added, 03:23, 12 July 2020
cleanup
<onlyinclude>
The Belly Pan AKA Skid Plate covers the [[Onboard Charger|onboard charger]] and is metallic on the DS/DSR and a very hard ABS plastic on the S/SR models.
[[File:2016-ds-skid-plate.png|thumb|DS Belly Pan / Skid Plate]]
Both variants are sturdy enough to support the bike on a centerlift.

;Parts
: S/SR: Hard plastic, part 24-07746.
: DS/DSR: Aluminum alloy [http://asm.matweb.com/search/SpecificMaterial.asp?bassnum=ma5052h32 5052-H32], part 26-08051 (was 20-05126).

;Dimensions
*Lengths
** 20.5in from forward bevel lip to trailing edge below the motor.
** 14.5in along the flat base.
** 2.25in along forward bevel.
*Widths
** 10.25in at the vertical outside face.
** 11 15/16in edge to edge of the flange facing the frame.
*Heights
** 2.5in from frame-facing edge to the bottom edge (not counting louver overhang).
** 1in height 45&deg; bevel.
*Thickness
** 3mm for the DS/DSR metallic pan.

;Drop bar Mounts
* 2&times; holes per side for M6 bolts, 45mm center-to-center forward to aft.

;Mounting
: Fastened by 8 M5&times;16-8.8 button head bolts, 4 per side.
: Forward corner bolts fasten into corner brackets (part 20-05307) that extend the lower frame square tubing.

;[[Belly Pan Removal]]
{{:Belly Pan Removal}}
</onlyinclude>

[[Category:Bodywork]]

Navigation menu