5,366
edits
Changes
cleanup
<onlyinclude>
;Controller Location
: The [[Gen2/Motor Controller|controller]] is located beneath the seat at the front of the tail assembly.
;Controller Fasteners
: The baseplate is fastened from the underside of the tail of the frame, between the frame "horns".
: A [[Gen2/Motor Controller/Cover|plastic sheet cover]] is fastened across the top of the controller by a Phillips head screw (PH1).
: A [[Gen2/Motor Controller/Heatsink|heatsink]] is fastened to its surface for radiative cooling, with a thermal paste between to maximize heat transfer via contact/conduction.
: 4 M6 bolts secure the controller baseplate to the frame.
:* For size 2 and size 4 controllers, the base plate is 12mm thick.
:* For size 6 controllers, the base plate is 20mm thick.
</onlyinclude>
;Controller Location
: The [[Gen2/Motor Controller|controller]] is located beneath the seat at the front of the tail assembly.
;Controller Fasteners
: The baseplate is fastened from the underside of the tail of the frame, between the frame "horns".
: A [[Gen2/Motor Controller/Cover|plastic sheet cover]] is fastened across the top of the controller by a Phillips head screw (PH1).
: A [[Gen2/Motor Controller/Heatsink|heatsink]] is fastened to its surface for radiative cooling, with a thermal paste between to maximize heat transfer via contact/conduction.
: 4 M6 bolts secure the controller baseplate to the frame.
:* For size 2 and size 4 controllers, the base plate is 12mm thick.
:* For size 6 controllers, the base plate is 20mm thick.
</onlyinclude>