SDS Platform/Fabricate Permanent Onboard Power Cable

From Unofficial Zero Manual
< SDS Platform
Revision as of 22:10, 17 January 2020 by BrianTRice (talk | contribs) (extract from Advanced Modifications)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
2016 DSR with leave-in kettle cord installed
Goal

Convenient modification for with digiNow SuperCharger v2 installed and pigtail option to split one phase of the J1772 input to an edison plug pigtail.

Model year 2016 DSR used for illustration
Materials
3ft 14AWG Right Angle Power Cord #7683 from Monoprice retailer.
Zip ties
Steps
  1. Remove onboard charger rubber dust cap
  2. Remove the plastics if you want to route behind them.
  3. Insert the leave-in kettle cord.
    Zip-tie applied
  4. Affix zip ties as needed and reinstall the plastics.