5,366
edits
Changes
no edit summary
<onlyinclude>
{|
| [[File:2013_zero-s_detail_frame_978x385_feature_8082 cropped.png|link=http://www.zeromotorcycles.com/zero-s/2013/features.php|none|thumb|2013 S Platform Frame]]
| [[File:2016_zero-s_detail_frame_978x385_feature_15456 cropped.png|link=http://www.zeromotorcycles.com/zero-s/2016/features.php|none|thumb|2014-2016 S Platform Frame]]
|-
| [[File:2014-zero-S-frame-iso.png|thumb|2014S frame isometric]]
|}
: The 2013+ Zero frame for S/DS/SR/DSR bikes is made of anodized aluminum, weighs 23lbs, and is a combination of cast parts and welded square tubing of 1-inch outer width.
: The frame slips onto the battery pack case over the top and attaches to it with four major bolts around the bottom. The charger is attached to the underside with a protective plate covering it (plastic for S/SR, aluminum for DS/DSR).
:; Attachment Points
:: The frame offers a number of rivet nut attachment points for the lower plastics.
:: The rivet nuts are sized to accept M5 bolts (a total depth of 20mm is available without marring the inside of the frame bar) with a 6mm shoulder to a depth of 5mm. (A longer shoulder and length are required for fastening a bracket beyond that.)
:: From 2015 onwards, the frame has extra attachment points made for the crash bars used for fleet/police models.
::: Two extra rivet nut holes on each side of the frame diagonal shoulder of the same size. They are 30mm apart (center to center).
::: The lower bash plate has similar modifications from that year - two rivet nut holes pre-made for M6 bolts and capped by threaded plastic inserts on each side for the lower mount. There is perhaps 10mm thread depth or allowance between the outer surface of the plate and the onboard charger enclosure.
::: On prior year models, the OEM or dealer would make these fittings.
;Vertical Stanchions
<gallery>
Image:2017-S-Frame - Vertical Stanchion Right Front.png|Vertical Stanchion Right
Image:2017-S-Frame - Vertical Stanchion Right Inside.png|Vertical Stanchion Right
Image:2017-S-Frame - Vertical Stanchion Right Rear.png|Vertical Stanchion Right
Image:2017-S-Frame - Vertical Stanchion Left Inside Lower.png|Vertical Stanchion Left
Image:2017-S-Frame - Vertical Stanchion Left Inside Plug 1.png|Vertical Stanchion Left
Image:2017-S-Frame - Vertical Stanchion Left Inside Plug 2.png|Vertical Stanchion Left
Image:2017-S-Frame - Vertical Stanchion Left Inside Plug 3.png|Vertical Stanchion Left
Image:2017-S-Frame - Vertical Stanchion Left Inside.png|Vertical Stanchion Left
Image:2017-S-Frame - Vertical Stanchion Left Outside.png|Vertical Stanchion Left
</gallery>
;Tail Horns
<gallery>
Image:2017-S-Frame - Tail Horns Side.png|Tail Horns (Left)
Image:2017-S-Frame - Tail Horns Top.png|Tail Horns (Top)
Image:2017-S-Frame - Horns Rear.png|Tail Horns (Rear)
</gallery>
;Neck and Shoulder
<gallery>
Image:2017-S-Frame - Neck Above.png|Neck and Shoulder (Top)
Image:2017-S-Frame - Neck Rear.png|Neck and Shoulder (Rear)
Image:2017-S-Frame - Shoulder Reinforcement.png|Neck and Shoulder
Image:2017-S-Frame - Left Shoulder Mount Holes.png|Neck and Shoulder (Left)
</gallery>
;Battery Carrier Tray
<gallery>
Image:2017-S-Frame - Battery Carrier Tray Top.png|Battery Carrier Tray
Image:2017-S-Frame - Battery Carrier Tray Forward Left Holes.png|Battery Carrier Tray (Left Holes)
Image:2017-S-Frame - Battery Carrier Tray Forward Right Holes.png|Battery Carrier Tray (Right Holes)
Image:2017-S-Frame - Battery Carrier Tray Rear.png|Battery Carrier Tray (Rear)
</gallery>
;Board Mounting Plate
<gallery>
Image:2017-S-Frame - Board Mounting Plate Left Bracket.png|Board Mounting Bracket (Left)
Image:2017-S-Frame - Board Mounting Plate Right Bracket.png|Board Mounting Bracket (Right)
</gallery>
====[[SDS Platform/Frame Tube|Frame Tube]]====
{{:SDS Platform/Frame Tube}}
====[[S Platform/Belly Pan|Belly Pan]]====
{{:S Platform/Belly Pan}}
====[[SDS Platform/Y-Shaped Underseat Subframe|Y-Shaped Underseat Frame]]====
{{:SDS Platform/Y-Shaped Underseat Subframe}}
====[[SDS Platform/Board Mounting Plate|Board Mounting Plate]]====
{{:SDS Platform/Board Mounting Plate}}
</onlyinclude>
[[Category:Structural Component]]
{|
| [[File:2013_zero-s_detail_frame_978x385_feature_8082 cropped.png|link=http://www.zeromotorcycles.com/zero-s/2013/features.php|none|thumb|2013 S Platform Frame]]
| [[File:2016_zero-s_detail_frame_978x385_feature_15456 cropped.png|link=http://www.zeromotorcycles.com/zero-s/2016/features.php|none|thumb|2014-2016 S Platform Frame]]
|-
| [[File:2014-zero-S-frame-iso.png|thumb|2014S frame isometric]]
|}
: The 2013+ Zero frame for S/DS/SR/DSR bikes is made of anodized aluminum, weighs 23lbs, and is a combination of cast parts and welded square tubing of 1-inch outer width.
: The frame slips onto the battery pack case over the top and attaches to it with four major bolts around the bottom. The charger is attached to the underside with a protective plate covering it (plastic for S/SR, aluminum for DS/DSR).
:; Attachment Points
:: The frame offers a number of rivet nut attachment points for the lower plastics.
:: The rivet nuts are sized to accept M5 bolts (a total depth of 20mm is available without marring the inside of the frame bar) with a 6mm shoulder to a depth of 5mm. (A longer shoulder and length are required for fastening a bracket beyond that.)
:: From 2015 onwards, the frame has extra attachment points made for the crash bars used for fleet/police models.
::: Two extra rivet nut holes on each side of the frame diagonal shoulder of the same size. They are 30mm apart (center to center).
::: The lower bash plate has similar modifications from that year - two rivet nut holes pre-made for M6 bolts and capped by threaded plastic inserts on each side for the lower mount. There is perhaps 10mm thread depth or allowance between the outer surface of the plate and the onboard charger enclosure.
::: On prior year models, the OEM or dealer would make these fittings.
;Vertical Stanchions
<gallery>
Image:2017-S-Frame - Vertical Stanchion Right Front.png|Vertical Stanchion Right
Image:2017-S-Frame - Vertical Stanchion Right Inside.png|Vertical Stanchion Right
Image:2017-S-Frame - Vertical Stanchion Right Rear.png|Vertical Stanchion Right
Image:2017-S-Frame - Vertical Stanchion Left Inside Lower.png|Vertical Stanchion Left
Image:2017-S-Frame - Vertical Stanchion Left Inside Plug 1.png|Vertical Stanchion Left
Image:2017-S-Frame - Vertical Stanchion Left Inside Plug 2.png|Vertical Stanchion Left
Image:2017-S-Frame - Vertical Stanchion Left Inside Plug 3.png|Vertical Stanchion Left
Image:2017-S-Frame - Vertical Stanchion Left Inside.png|Vertical Stanchion Left
Image:2017-S-Frame - Vertical Stanchion Left Outside.png|Vertical Stanchion Left
</gallery>
;Tail Horns
<gallery>
Image:2017-S-Frame - Tail Horns Side.png|Tail Horns (Left)
Image:2017-S-Frame - Tail Horns Top.png|Tail Horns (Top)
Image:2017-S-Frame - Horns Rear.png|Tail Horns (Rear)
</gallery>
;Neck and Shoulder
<gallery>
Image:2017-S-Frame - Neck Above.png|Neck and Shoulder (Top)
Image:2017-S-Frame - Neck Rear.png|Neck and Shoulder (Rear)
Image:2017-S-Frame - Shoulder Reinforcement.png|Neck and Shoulder
Image:2017-S-Frame - Left Shoulder Mount Holes.png|Neck and Shoulder (Left)
</gallery>
;Battery Carrier Tray
<gallery>
Image:2017-S-Frame - Battery Carrier Tray Top.png|Battery Carrier Tray
Image:2017-S-Frame - Battery Carrier Tray Forward Left Holes.png|Battery Carrier Tray (Left Holes)
Image:2017-S-Frame - Battery Carrier Tray Forward Right Holes.png|Battery Carrier Tray (Right Holes)
Image:2017-S-Frame - Battery Carrier Tray Rear.png|Battery Carrier Tray (Rear)
</gallery>
;Board Mounting Plate
<gallery>
Image:2017-S-Frame - Board Mounting Plate Left Bracket.png|Board Mounting Bracket (Left)
Image:2017-S-Frame - Board Mounting Plate Right Bracket.png|Board Mounting Bracket (Right)
</gallery>
====[[SDS Platform/Frame Tube|Frame Tube]]====
{{:SDS Platform/Frame Tube}}
====[[S Platform/Belly Pan|Belly Pan]]====
{{:S Platform/Belly Pan}}
====[[SDS Platform/Y-Shaped Underseat Subframe|Y-Shaped Underseat Frame]]====
{{:SDS Platform/Y-Shaped Underseat Subframe}}
====[[SDS Platform/Board Mounting Plate|Board Mounting Plate]]====
{{:SDS Platform/Board Mounting Plate}}
</onlyinclude>
[[Category:Structural Component]]
