5,366
edits
Changes
link update
<onlyinclude>
The [http://www.zeromotorcycles.com/shop/index.php?main_page=product_info&cPath=15_18&products_id=176 OEM Fly Screen] provides 2013 Zero models with a small but reasonably good-looking hard plastic shroud around the [[Koso RX-1N|Koso instrument cluster]] above the [[SDS Platform/Headlamp|headlamp]].
: [[File:flyscreen-installed-dash.jpg|thumb|Flyscreen over dash]][[File:flyscreen-installed-front.jpg|thumb|Flyscreen installed]]
: Presumably this has a marginal effect on drag and energy consumption, but it probably helps smooth airflow with or without a windscreen.
: 2014+ S models have a plastic enclosure for the headlamp that interferes with this.
;Parts
: [[File:flyscreen-parts.jpg|200px|Flyscreen parts]]
* Flyscreen
* Flyscreen rubber bumper with tape
* (2) spacers
* (2) M5⨉25 cap head bolts
;Tools
* 3mm Allen key
* Cutting tool (~scissors)
;Installation
# Remove the upper mounting screws for the [[SDS Platform/Headlamp|headlight]].
# Place the included bolts through the holes in the side of the flyscreen.
# Place the spacers onto the bolts on the inside of the flyscreen.
# Carefully place the flyscreen over the headlamp, matching the bolt position to the upper headlight mounting holes.
#: The bolts must be withdrawn slightly to surround the headlight mount points.
# Engage the flyscreen mounting bolts to hold the flyscreen onto the headlight.
# Cut the rubber bumper's two side spacers off.
# Place the bumper against the top of the [[Koso RX-1N|Koso gauge instrument cluster]].
# Remove the tape along the top and press the flyscreen to it.
# Tighten the flyscreen mounting bolts.
</onlyinclude>
[[Category:Aftermarket]]
[[Category:Install]]
The [http://www.zeromotorcycles.com/shop/index.php?main_page=product_info&cPath=15_18&products_id=176 OEM Fly Screen] provides 2013 Zero models with a small but reasonably good-looking hard plastic shroud around the [[Koso RX-1N|Koso instrument cluster]] above the [[SDS Platform/Headlamp|headlamp]].
: [[File:flyscreen-installed-dash.jpg|thumb|Flyscreen over dash]][[File:flyscreen-installed-front.jpg|thumb|Flyscreen installed]]
: Presumably this has a marginal effect on drag and energy consumption, but it probably helps smooth airflow with or without a windscreen.
: 2014+ S models have a plastic enclosure for the headlamp that interferes with this.
;Parts
: [[File:flyscreen-parts.jpg|200px|Flyscreen parts]]
* Flyscreen
* Flyscreen rubber bumper with tape
* (2) spacers
* (2) M5⨉25 cap head bolts
;Tools
* 3mm Allen key
* Cutting tool (~scissors)
;Installation
# Remove the upper mounting screws for the [[SDS Platform/Headlamp|headlight]].
# Place the included bolts through the holes in the side of the flyscreen.
# Place the spacers onto the bolts on the inside of the flyscreen.
# Carefully place the flyscreen over the headlamp, matching the bolt position to the upper headlight mounting holes.
#: The bolts must be withdrawn slightly to surround the headlight mount points.
# Engage the flyscreen mounting bolts to hold the flyscreen onto the headlight.
# Cut the rubber bumper's two side spacers off.
# Place the bumper against the top of the [[Koso RX-1N|Koso gauge instrument cluster]].
# Remove the tape along the top and press the flyscreen to it.
# Tighten the flyscreen mounting bolts.
</onlyinclude>
[[Category:Aftermarket]]
[[Category:Install]]
