5,366
edits
Changes
no edit summary
<onlyinclude>
This replaces the [[Turn Signal Flasher]] relay on the [[SDS Platform]].
;Steps
# [[SDS Platform/Seat Removal|Remove the seat]].
# [[SDS Platform/Tank Plastics/Removal|Remove the tank plastics]].
# Access the front of the tank area under the neck of the frame behind the head tube.
#: If your bike has a [[Charge Tank]] or [[Power Tank]]:
#:* Lift that equipment up and out of the way, ''or''
#:* Access the relay from the front of the frame under the neck.
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401 connectsumitomo.jpg|thumb|none|The connectors at the front of the tank]]
# Unplug the existing relay.
# Confirm that the polarity of the 3-pin relay matches the new relay.
# Plug in the new relay.
# Key on the bike and test the turn signals to confirm.
# Replace the tank plastics.
# Replace the seat.
</onlyinclude>
[[Category:12V Electrical Procedure]]
This replaces the [[Turn Signal Flasher]] relay on the [[SDS Platform]].
;Steps
# [[SDS Platform/Seat Removal|Remove the seat]].
# [[SDS Platform/Tank Plastics/Removal|Remove the tank plastics]].
# Access the front of the tank area under the neck of the frame behind the head tube.
#: If your bike has a [[Charge Tank]] or [[Power Tank]]:
#:* Lift that equipment up and out of the way, ''or''
#:* Access the relay from the front of the frame under the neck.
#: [[File:SDS12VACCESSORYSOCKETKIT14MY10-0750401 connectsumitomo.jpg|thumb|none|The connectors at the front of the tank]]
# Unplug the existing relay.
# Confirm that the polarity of the 3-pin relay matches the new relay.
# Plug in the new relay.
# Key on the bike and test the turn signals to confirm.
# Replace the tank plastics.
# Replace the seat.
</onlyinclude>
[[Category:12V Electrical Procedure]]