5,366
edits
Changes
no edit summary
<onlyinclude>
[[File:Dsr-under-seat.JPG|thumb|2016 DSR underseat view]]
This frame piece spans the top of the frame between the part that sits behind the battery doghouse and the tail.
;Functions
* Support and anchor the [[SDS Platform/Seat|seat]] by two pins extending from the forward center section.
* Anchor the rear of the [[SDS Platform/Tank Plastics|tank plastics]].
* Mount the [[12V Fuse Block]] on the left rear leg.
* Distributes the seat loading between the forward frame bracket arching over the monolith, and the horns of the rear tail.
*: This protects underlying cabling, as well as dampens any load on the frame that would flex the tail relative to the forward part of the frame.
* Removable (vs being frame-integrated or welded) for servicing everything above the motor (MBB, DC-DC converter, and cabling and wiring).
;Mounting
* '''Forward:''' 2x 10mm hex nylon locknuts, with washers.
* '''Rear:''' 2x M5 socket cap bolts, 20mm length with a 2mm shoulder, 1mm depth, 6mm outer diameter, with washers.
;[[SDS Platform/Y-Shaped Underseat Frame Removal|Removal]]
{{:SDS Platform/Y-Shaped Underseat Frame Removal}}
</onlyinclude>
[[Category:Structural Component]]
[[File:Dsr-under-seat.JPG|thumb|2016 DSR underseat view]]
This frame piece spans the top of the frame between the part that sits behind the battery doghouse and the tail.
;Functions
* Support and anchor the [[SDS Platform/Seat|seat]] by two pins extending from the forward center section.
* Anchor the rear of the [[SDS Platform/Tank Plastics|tank plastics]].
* Mount the [[12V Fuse Block]] on the left rear leg.
* Distributes the seat loading between the forward frame bracket arching over the monolith, and the horns of the rear tail.
*: This protects underlying cabling, as well as dampens any load on the frame that would flex the tail relative to the forward part of the frame.
* Removable (vs being frame-integrated or welded) for servicing everything above the motor (MBB, DC-DC converter, and cabling and wiring).
;Mounting
* '''Forward:''' 2x 10mm hex nylon locknuts, with washers.
* '''Rear:''' 2x M5 socket cap bolts, 20mm length with a 2mm shoulder, 1mm depth, 6mm outer diameter, with washers.
;[[SDS Platform/Y-Shaped Underseat Frame Removal|Removal]]
{{:SDS Platform/Y-Shaped Underseat Frame Removal}}
</onlyinclude>
[[Category:Structural Component]]
