5,366
edits
Changes
video embed
<onlyinclude>
This removes the [[SDS Platform/Seat|seat]] from [[SDS Platform]] bikes.
;Video Guide
: [https://www.youtube.com/watch?v=T80siAHG7Z8 Zero motorcycle - How to remove your seat] by [https://www.youtube.com/channel/UCw9faNzFHkqXDsybkH7Qqig Alternative Standard on YouTube]
:: {{#ev:youtube|T80siAHG7Z8}}
;Notes
* Unload any luggage racks before taking the seat off for an extended period of time to avoid stressing the racks.
*: When luggage racks are installed, the seat bolts are load bearing (or at least damping).
* An M8-1.25×55mm socket cap bolt with a 6mm Allen head can be used if the kit bolt is lost.
;Tools
* '''2015+:''' T45 Torx wrench (for seat bolts).
* '''2013-2014 (with top or side racks):''' 5mm Allen key (for seat bolts).
;Steps
# ''When luggage racks are installed'' Remove the top case and/or side cases to ensure the rack is unloaded.
# Remove the M8-1.25×55 seat bolts.
#: Push the seat down and forward as needed to help ease out the bolts.
#: [[File:TOPRACKKIT10-0692107_seatfastener.jpg|thumb|none|Seat Fasteners]][[File:MY2016DSR_seatfastener_withtoprack.jpg|thumb|none|Seat Fasteners with Top Rack Installed]]
# Pull the seat back a couple of inches and then upwards.
</onlyinclude>
[[Category:Procedure]]
[[Category:Teardown]]
This removes the [[SDS Platform/Seat|seat]] from [[SDS Platform]] bikes.
;Video Guide
: [https://www.youtube.com/watch?v=T80siAHG7Z8 Zero motorcycle - How to remove your seat] by [https://www.youtube.com/channel/UCw9faNzFHkqXDsybkH7Qqig Alternative Standard on YouTube]
:: {{#ev:youtube|T80siAHG7Z8}}
;Notes
* Unload any luggage racks before taking the seat off for an extended period of time to avoid stressing the racks.
*: When luggage racks are installed, the seat bolts are load bearing (or at least damping).
* An M8-1.25×55mm socket cap bolt with a 6mm Allen head can be used if the kit bolt is lost.
;Tools
* '''2015+:''' T45 Torx wrench (for seat bolts).
* '''2013-2014 (with top or side racks):''' 5mm Allen key (for seat bolts).
;Steps
# ''When luggage racks are installed'' Remove the top case and/or side cases to ensure the rack is unloaded.
# Remove the M8-1.25×55 seat bolts.
#: Push the seat down and forward as needed to help ease out the bolts.
#: [[File:TOPRACKKIT10-0692107_seatfastener.jpg|thumb|none|Seat Fasteners]][[File:MY2016DSR_seatfastener_withtoprack.jpg|thumb|none|Seat Fasteners with Top Rack Installed]]
# Pull the seat back a couple of inches and then upwards.
</onlyinclude>
[[Category:Procedure]]
[[Category:Teardown]]