Template:Kickstand Switch Hazard
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
 Warning: |
- Kickstand Sensor Electrical Equipment Hazard
- The connector is three pronged and needs to be connected correctly or can damage the MBB irreparably.
- Do not disconnect or reconnect while the vehicle is keyed on or contactor is shut to be safe.
- Do not short any wires together to bypass.
- This is a Hall effect sensor usually containing or using sensitive measurement IC's and therefore not a simple switch.
|