5,366
edits
Changes
m
no edit summary
<onlyinclude>
A total loss of power includes the 12V system and the powertrain.
; Related Confirming Symptoms
* Headlamp, turn signals, and running/brake lights are ''all'' '''off'''.
* [[Gen2/Instrument Cluster|Dash/instrument cluster]] is '''off''' and the bike '''cannot operate'''.
;Potential Causes
* [[MBB]] failure
*: A major MBB hardware failure can produce a total loss of power with these characteristics:
*:* No power at all with the ignition on: no contractor click, no power on the dash board, no error codes, no 12 volts activity (no front or brake lights, no dashboard backlight).
*:* Unable to charge.
*:* Unable to connect to the bike using bluetooth in the app.
*: This might happen as a consequence of a short circuit that over-discharges the MBB.
* Blown high voltage fuses.
;Troubleshooting
* Confirm normal behavior on the [[BMS]] (forth led flashing every two seconds, green).
*: You may have to reset the BMS in order to confirm this led normal behavior.
* Check that the low and high voltage fuses are intact (resistance?).
</onlyinclude>
[[Category:Symptom]]
A total loss of power includes the 12V system and the powertrain.
; Related Confirming Symptoms
* Headlamp, turn signals, and running/brake lights are ''all'' '''off'''.
* [[Gen2/Instrument Cluster|Dash/instrument cluster]] is '''off''' and the bike '''cannot operate'''.
;Potential Causes
* [[MBB]] failure
*: A major MBB hardware failure can produce a total loss of power with these characteristics:
*:* No power at all with the ignition on: no contractor click, no power on the dash board, no error codes, no 12 volts activity (no front or brake lights, no dashboard backlight).
*:* Unable to charge.
*:* Unable to connect to the bike using bluetooth in the app.
*: This might happen as a consequence of a short circuit that over-discharges the MBB.
* Blown high voltage fuses.
;Troubleshooting
* Confirm normal behavior on the [[BMS]] (forth led flashing every two seconds, green).
*: You may have to reset the BMS in order to confirm this led normal behavior.
* Check that the low and high voltage fuses are intact (resistance?).
</onlyinclude>
[[Category:Symptom]]
