5,366
edits
Changes
m
typo
<onlyinclude>
Zero makes soft (synthetic) saddlebags that work with any of their models.
: [[File:10-08040-parts.jpeg|thumb|Zero soft saddlebags product contents]]
;Capacity
: 16L per bag (32L total).
: 40,6 x 25,4 x 18,5 cm. (per Zero's product page)
;Material
: 1680 denier polyester
;Features
* Attached rain hood.
* Zipper pulls.
* Quick-release buckles.
* Web strapping.
* Mesh pockets.
* Plastic handles.
;Part Numbers
* 10-08040
;Elements
* (2) saddlebags with large straps.
*: Rain covers are attached, and stored in a separate zippered pouch.
* (2) protector pads.
* (6) separate straps.
* Installation leaflet without pictures.
{{warning|Soft saddlebags can interfere with the rear wheel or suspension if not secured adequately.}}
;Installation
# Place the saddlebags over the tail/fender.
#: Loosen the velcro straps so the bags hang without tipping too far out or in.
#: Place the top part of the pad against the tail.
# Secure the loop straps around the frame.
#: Connect them to the D rings at the front of the saddlebags.
# Route the rear strap under or around the rear tail fender.
# Tighten the side straps, and then the rear strap.
#: Ensure the saddlebags hang straight down.
#: The safety reflector on the tail legally needs to be visible, so avoid obstructing that.
;References
* [https://www.electricmotorcycleforum.com/boards/index.php?topic=10048 Zero Soft Saddlebags]
</onlyinclude>
[[Category:Product]]
[[Category:Aftermarket]]
Zero makes soft (synthetic) saddlebags that work with any of their models.
: [[File:10-08040-parts.jpeg|thumb|Zero soft saddlebags product contents]]
;Capacity
: 16L per bag (32L total).
: 40,6 x 25,4 x 18,5 cm. (per Zero's product page)
;Material
: 1680 denier polyester
;Features
* Attached rain hood.
* Zipper pulls.
* Quick-release buckles.
* Web strapping.
* Mesh pockets.
* Plastic handles.
;Part Numbers
* 10-08040
;Elements
* (2) saddlebags with large straps.
*: Rain covers are attached, and stored in a separate zippered pouch.
* (2) protector pads.
* (6) separate straps.
* Installation leaflet without pictures.
{{warning|Soft saddlebags can interfere with the rear wheel or suspension if not secured adequately.}}
;Installation
# Place the saddlebags over the tail/fender.
#: Loosen the velcro straps so the bags hang without tipping too far out or in.
#: Place the top part of the pad against the tail.
# Secure the loop straps around the frame.
#: Connect them to the D rings at the front of the saddlebags.
# Route the rear strap under or around the rear tail fender.
# Tighten the side straps, and then the rear strap.
#: Ensure the saddlebags hang straight down.
#: The safety reflector on the tail legally needs to be visible, so avoid obstructing that.
;References
* [https://www.electricmotorcycleforum.com/boards/index.php?topic=10048 Zero Soft Saddlebags]
</onlyinclude>
[[Category:Product]]
[[Category:Aftermarket]]
