Difference between revisions of "Gen2/Triple Clamp"
From Unofficial Zero Manual
< Gen2
BrianTRice (talk | contribs) (extract from service manual) |
(No difference)
|
Latest revision as of 04:19, 4 December 2019
The triple clamp tree attaches the fork tubes to the frame via the steering head bearing.
The design and fitment changed from MY 2013-2014 to MY 2015+, when the forks changed from FastAce to Showa.
- Upper Assembly
- This sits atop the steering head, joining the forks at the top, and supports the handlebars, ignition switch, dash, and headlamp.
- Lower Assembly
- This inserts upward through the steering head tube, joining the forks below the tube, and supports the headlamp bracket and the high fender for DS/DSR/FX models.
The upper assembly and lower assembly join around/through the steering head.
