Difference between revisions of "Gen2/Motor Mounting"
From Unofficial Zero Manual
< Gen2
BrianTRice (talk | contribs) (extract from service manual) |
(No difference)
|
Latest revision as of 22:13, 18 January 2020
On the motor there are 8 M8 bolts holding the motor in place: 4 on the drive side, 4 on the rear side.
- Those bolts only have about 12Nm of torque on them.
- References
- Burton's 2013 to 2014 motor swap thread shows the most detail about the physical mounting of the motor.
