Difference between revisions of "Controller Cover Replacement"

Latest revision as of 06:46, 24 January 2020

This (re-)installs the Sevcon controller cover in the tail.

Prerequisites

1. Remove the seat
2. Remove the Y-Shaped Underseat Subframe.

Tools

• Small Philips-head screwdriver (PH1)

Steps

1. Lay the front of the sheet down around the connector wiring and cabling.
2. Insert each side edge carefully under each side rail of the frame's tail section.
3. Push the aft end of the sheet down towards the frame cross-piece behind the Sevcon controller.
4. Fasten the sheet at the aft end with the screw using a small Philips Head (PH1) screwdriver.