Difference between revisions of "Gen3/Log Messages"
From Unofficial Zero Manual
< Gen3
BrianTRice (talk | contribs) m |
(No difference)
|
Latest revision as of 07:33, 11 May 2020
| Message | Component | Interpretation |
|---|---|---|
| 3kW | ||
| ABS light changed | ABS | |
| All Contactors open | Contactor | |
| At least one contactor is now closed | Contactor | |
| BT | Bluetooth | |
| Blinker cancelled | Turn Signals | |
| Board was reset | MBB | |
| CAN1txQ | ||
| CCM hb flags changed | Cellular Communication Module | |
| CHARGER LSS | ||
| Connecting mod 2 | BMS | |
| Control flags changed | ||
| Controller power OFF | Motor Controller | |
| Controller power ON | Motor Controller | |
| controller warning 50 | Motor Controller | |
| Current | ||
| Disable flags changed | ||
| Fault cleared | MBB | |
| Fault pending | MBB | |
| Fault set | MBB | |
| Key Sw | Ignition Switch | |
| Kickstand Sw | Kickstand Switch | |
| Kill Sw | Kill Switch | |
| LSS | ||
| Left blinker activated | Turn Signals | |
| MTC light changed | Bosch MSC | |
| Module 2 Contactor is now Closed | Contactor | |
| Module 2 unregistered. Num rx last 2s: 0 | BMS | |
| Precharging from module 2, Vpackoc | Precharge | |
| Registering Mod 2 | BMS | |
| Right blinker activated | Turn Signals | |
| Saving Stats, Hibernating for 3600 sec | MBB | |
| Starting 12v charge | 12V Battery | |
| State change | MBB | |
| Stopping 12v charge | 12V Battery | |
| Timed out in PW Startup | MBB |
