XMX Platform/Switch Dual to Single Battery
From Unofficial Zero Manual
< XMX Platform
Revision as of 06:47, 22 January 2020 by BrianTRice (talk | contribs) (extract from Common Modifications)
If you want to use your dual brick FX/FXS with a single module, you need to place a special dummy plug in place of the missing battery to ride.
The FX/FXS are delivered with this plug zip-tied under the front of the seat.
- Construction
- Here is the plug wiring.
- It consists of a single jumper between pins 5 and 7 on the Auxiliary Contact Housing, Anderson Part Number: 3-6018P1.
- The high current contacts are not used.
-
