Difference between revisions of "Charge Failure After Blink Sequence"
From Unofficial Zero Manual
BrianTRice (talk | contribs) (extract from Common Problems) |
(No difference)
|
Latest revision as of 07:01, 13 January 2020
When the charge indicator blinks 4 or 5 times, and charging fails to start.
- Cause
- The charging fuse could be blown.
- Recommendation
- Find the charging fuse in the wiring harness, remove it from the heat shrink, and replace it.
- It is unclear whether a resistance check can be easily performed to save time troubleshooting, but a voltage check should work.
Harness with charging fuse inside heatshrink
Harness with charging fuse, cut open
Harness with charging fuse, cut open, back
- Owner Comment
SF Moto took 1.5 hours troubleshooting and then replaced the entire harness. Total cost about $650. The fuse is inside the thick heat shrink.
