Difference between revisions of "Gen2/Meanwell Charger"

From Unofficial Zero Manual
Jump to: navigation, search
(new component article)
 
(update links)
 
Line 1: Line 1:
 
<onlyinclude>
 
<onlyinclude>
The [https://www.meanwell-web.com/en/ Meanwell] [https://www.meanwell-web.com/en/product-info/ac-dc-power-supply/led-driver/gt-185-w-led-driver/hlg-320h/product/HLG-320H-54A HLG-320H-54A] power supplies are used as onboard chargers for early [[Gen2]] Zero models (2013 and the 2014FX) and are directed by the CCU board since they lack a CANBus integration.
+
The [https://www.meanwell-web.com/en/ Meanwell] [https://www.meanwell-web.com/en/product-info/ac-dc-power-supply/led-driver/gt-185-w-led-driver/hlg-320h/product/HLG-320H-54A HLG-320H-54A] power supplies are used as onboard chargers for early [[Gen2]] Zero models (2013 and the 2014FX) and are directed by the [[CCU]] board since they lack a CANBus integration.
  
 
;Configuration
 
;Configuration

Latest revision as of 00:06, 10 July 2020

The Meanwell HLG-320H-54A power supplies are used as onboard chargers for early Gen2 Zero models (2013 and the 2014FX) and are directed by the CCU board since they lack a CANBus integration.

Configuration
  • For SDS Platform models, 4 chargers are wired 2s2p for 1.3kW total.
    If any power supply unit fails, the charger should drop to half its output capacity (whether by blowing a fuse or faulting open internally).
  • For XMX Platform models, 2 chargers are wired in serise (2s1p) for 650W total.
    If either power supply unit fails, the charger will fail to produce output entirely.
Repair
  • See Half of a charger fail.
  • It is possible to replace only the dead charger if you have one.
    You'll need big crimping tools and shrinking sleeves.
    Zero sends the full pack of four chargers.


Articles