5,366
edits
Changes
extract from service manual
<onlyinclude>
Motor alignment refers to physical alignment of the motor with the frame and swingarm so that power is transmitted correctly to the final drive.
: The back side of the motor (encoder side) has screw jack bolts that let you tweak the motor position.
: Mostly this is only needed when (re)installing the motor.
;Steps
# Loosen the four M6 socket head screws.
# Adjust the portion of the silver nut that is not wedged into the slot on the motor.
</onlyinclude>
[[Category:Procedure]]
Motor alignment refers to physical alignment of the motor with the frame and swingarm so that power is transmitted correctly to the final drive.
: The back side of the motor (encoder side) has screw jack bolts that let you tweak the motor position.
: Mostly this is only needed when (re)installing the motor.
;Steps
# Loosen the four M6 socket head screws.
# Adjust the portion of the silver nut that is not wedged into the slot on the motor.
</onlyinclude>
[[Category:Procedure]]