5,366
edits
Changes
extract from service manual
<onlyinclude>
The underside face of the controller is directly covered by a finned heatsink that faces downwards toward the rear wheel and swingarm.
* The heatsink varies in size with the size of the controller.
* A thermal paste is applied between the heatsink and baseplate to maximize heat transfer via contact/conduction.
* The rear shock connects just ahead of the heatsink to the frame center tube.
</onlyinclude>
[[Category:Component]]
The underside face of the controller is directly covered by a finned heatsink that faces downwards toward the rear wheel and swingarm.
* The heatsink varies in size with the size of the controller.
* A thermal paste is applied between the heatsink and baseplate to maximize heat transfer via contact/conduction.
* The rear shock connects just ahead of the heatsink to the frame center tube.
</onlyinclude>
[[Category:Component]]