Gen2/Rear Axle Removal

This is part of Rear Wheel Removal.

Tools

• 27mm socket
• Breaker bar

Instructions

1. Place the motorcycle on a lift or rear stand so the wheel spins freely.
2. Mark/photograph where the alignment marks reside on each side of the axle for re-alignment when re-installing the wheel.
3. Loosen the rear axle nut on the right side (27mm) with the breaker bar.
4. Remove the rear axle nut.
5. Pull the axle part-way out so that the wheel can be moved forward enough to loosen the belt.
6. Pull the belt off of the rear sprocket and let it hang outside of the swingarm slightly to avoid interfering with the wheel.
7. Pull the axle through the wheel from the left side.