Difference between revisions of "Kickstand"

From Unofficial Zero Manual
Jump to: navigation, search
(extract from service manual)
(transclude tags)
Line 1: Line 1:
 +
<onlyinclude>
 
The kickstand for S and X platforms is made from cast aluminum and swings outward from the left side.
 
The kickstand for S and X platforms is made from cast aluminum and swings outward from the left side.
  
Line 55: Line 56:
 
;[[Kickstand Replacement|Replacement]]
 
;[[Kickstand Replacement|Replacement]]
 
{{:Kickstand Replacement}}
 
{{:Kickstand Replacement}}
 +
 +
</onlyinclude>

Revision as of 06:13, 7 November 2019

The kickstand for S and X platforms is made from cast aluminum and swings outward from the left side.

There is a safety interlock Hall sensor switch at the pivot that prevents the motor from operating when the kickstand is down.

Kickstands
Years Model Length Part no
2013-2014? S/SR shorter than the DS/DSR 20-05660 03
DS/DSR 10.8" / 275mm 20-05661 03
FX 15.0" / 380mm 20-05662 03
FXS
2015+ FX 13.5" / 343mm
FXS 11.8" / 300mm

Both DS and FX kickstands are identical from the spring screw up to the pivot, and should interchange.

All the 2013+ kickstands uses the same pivot pin & spring.

References
Re: 2016 FXS Lowered Ride Height OEM Shock, Dual Use Tires, Drop Bars, Hand Guards,
Help needed: Kickstand "bent"
Mounting
3/8" E clip, Zero part no 90-0283700, also available generically.
Clevis pin custom, Zero part no 90-0279900.
Mounting bracket, custom
Maintenance
The official manual recommends keeping the pivot greased as necessary with a six-month check interval.
Replacement

This replaces the Kickstand.

See Kickstand Removal and Kickstand Install for now.