Difference between revisions of "Kickstand Removal"

From Unofficial Zero Manual
Jump to: navigation, search
m (warning callout)
(link update)
 
Line 1: Line 1:
This replaces the [[Unofficial Service Manual#Kickstand|Kickstand]].
+
This replaces the [[Kickstand]].
  
 
<onlyinclude>
 
<onlyinclude>

Latest revision as of 06:15, 7 November 2019

This replaces the Kickstand.


Tools
  • Center lift or stand.
  • Large flat-blade screwdriver or specialized tool like drum brake spring pliers for spring removal and replacement.
  • E-clip tool (or needlenose pliers) for the 3/8" E-clip.
Steps
  1. Place the motorcycle on a center lift or stand.
Spring Before Pin
  1. Pull the spring off of the kickstand hook with a large flat blade screwdriver or a specialized kickstand spring release tool.
    Raise the kickstand to the stowed/horizontal position, to reduce spring tension.
    Warning Warning: Be extremely careful working with the kickstand spring as it is under high tension.
    A specialized tool makes this easier.
  2. Remove the pivot pin.
  3. Remove the kickstand.
Pin Before Spring
  1. Remove the pivot pin.
    1. Pull the E-clip off of the inside of the pivot.
    2. Raise the kickstand to the stowed/horizontal position, to reduce spring tension.
    3. Go to the left side of bike.
    4. Wiggle the kickstand while tapping the pivot pin from underneath with for example a soft faced hammer.
    5. Continue to wiggle the kickstand while gripping the pin until it slides out.
      Often comes out by hand with a rag.
  2. Carefully slide kickstand away from frame and unhook springs from frame.
    The kickstand will still be under some tension from both springs, inner and outer.


References