Loopback Blanking Plug

From Unofficial Zero Manual
Revision as of 19:21, 29 December 2019 by BrianTRice (talk | contribs) (link update)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The loopback blanking plug is a Zero electrical connector cap that wires two pins together in a loopback circuit.

This meant to emulate a basic connectivity feature for the BMS1 connection so that the vehicle's CAN Bus can operate properly.

If you own a non-longbrick X platform model or an S-platform model with a Power Tank, retain this blanking plug in case your second BMS fails to connect or issues errors that prevent your motorcycle from operating.