Difference between revisions of "OEM Top Rack Install"

From Unofficial Zero Manual
Jump to: navigation, search
m (OEM Top Rack)
m
Line 1: Line 1:
 +
<includeonly>
 
This is for installing [[Zero_Aftermarket#Top_Rack|the OEM Top Rack]].
 
This is for installing [[Zero_Aftermarket#Top_Rack|the OEM Top Rack]].
 
: This process takes about 15 minutes and is very easy.
 
: This process takes about 15 minutes and is very easy.
Line 51: Line 52:
 
: Non-Givi adapters will likely require similar customizations unless they are made for the same fastener geometry.
 
: Non-Givi adapters will likely require similar customizations unless they are made for the same fastener geometry.
 
: The plate is made of steel so make sure to coat any exposed surfaces from drilling with paint etc to minimize corrosion.
 
: The plate is made of steel so make sure to coat any exposed surfaces from drilling with paint etc to minimize corrosion.
 +
 +
</includeonly>
  
 
[[Category:Procedure]]
 
[[Category:Procedure]]

Revision as of 17:40, 2 July 2018