Difference between revisions of "Turn Signal Flasher"

From Unofficial Zero Manual
Jump to: navigation, search
(fixed pin orientation listing)
(One intermediate revision by the same user not shown)
Line 8: Line 8:
 
  PN: 8078
 
  PN: 8078
 
  Made by Ecie Cheng Du
 
  Made by Ecie Cheng Du
 +
''or''
 +
GUILERA
 +
Flasher Unit 12V
 +
10+10W+1,2W
 +
P.N. 013341
  
 
;Low Noise Revision
 
;Low Noise Revision
 
: As of 2016, the part is [http://www.af1racing.com/store/Scripts/prodView.asp?idProduct=89625 revised with the description "low noise"].
 
: As of 2016, the part is [http://www.af1racing.com/store/Scripts/prodView.asp?idProduct=89625 revised with the description "low noise"].
 
:: This suggests reduced electronic and/or audible noise.
 
:: This suggests reduced electronic and/or audible noise.
:: This model of flasher relay is noticeably quieter, and that year coincides with reports from Zero management of EU EMF noise compliance expenditures.
+
:: This model of flasher relay is noticeably quieter, and that year coincides with reports from Zero management of EU EMF/EMC noise compliance expenditures.
 +
 
 +
;Silent Revision
 +
: As of 2020?, the part is from the manufacturer Guilera and makes no audible noise.
 +
:: This again suggests reduced electronic noise, again likely as a result of EU EMF/EMC noise compliance expenditures.
  
 
;Wiring
 
;Wiring
 
: The orientation is specific:
 
: The orientation is specific:
 
* Look at the pins with the middle L (load) pin on top.
 
* Look at the pins with the middle L (load) pin on top.
* '''2018+:''' The orientation should be '''E-''' (left), '''L''' (center), then '''B+''' (right)
+
* '''2018+:''' The orientation should be '''B+''' (left), '''L''' (center), then '''E-''' (right)
 +
*: The common CF13 relay orientation is appropriate.
 
*: Most off the shelf relays are oriented with '''E-''', '''L''', then '''B+''', and should connect without modifications.
 
*: Most off the shelf relays are oriented with '''E-''', '''L''', then '''B+''', and should connect without modifications.
* '''2013-2017:''' The left pin should be '''B1+''' (battery positive) and the right should be '''E1-''' (battery negative, AKA "emitter").
+
* '''2013-2017:''' The left pin should be '''E1-''' (battery negative, AKA "emitter") and the right should be '''B1+''' (battery positive).
*: The common CF13 relay orientation is appropriate for MY 2018+
+
*: The C14 relay orientation is appropriate for these models [http://electricmotorcycleforum.com/boards/index.php?topic=8751.0 per pacificcricket]
*: The C14 relay orientation is appropriate for models through 2013-2017 [http://electricmotorcycleforum.com/boards/index.php?topic=8751.0 per pacificcricket]
 
 
*: Reversing the wiring can be necessary to adapt a generic relay.   
 
*: Reversing the wiring can be necessary to adapt a generic relay.   
  

Revision as of 22:33, 13 February 2020

The turn signal ("blinker") flasher is a simple three prong flasher relay.

It's attached directly by a plug so is easily replaced if it fails (or for an LED compatible unit).
Label
Flasher Unit 12V
2x10W
PN: 8078
Made by Ecie Cheng Du

or

GUILERA
Flasher Unit 12V
10+10W+1,2W
P.N. 013341
Low Noise Revision
As of 2016, the part is revised with the description "low noise".
This suggests reduced electronic and/or audible noise.
This model of flasher relay is noticeably quieter, and that year coincides with reports from Zero management of EU EMF/EMC noise compliance expenditures.
Silent Revision
As of 2020?, the part is from the manufacturer Guilera and makes no audible noise.
This again suggests reduced electronic noise, again likely as a result of EU EMF/EMC noise compliance expenditures.
Wiring
The orientation is specific:
  • Look at the pins with the middle L (load) pin on top.
  • 2018+: The orientation should be B+ (left), L (center), then E- (right)
    The common CF13 relay orientation is appropriate.
    Most off the shelf relays are oriented with E-, L, then B+, and should connect without modifications.
  • 2013-2017: The left pin should be E1- (battery negative, AKA "emitter") and the right should be B1+ (battery positive).
    The C14 relay orientation is appropriate for these models per pacificcricket
    Reversing the wiring can be necessary to adapt a generic relay.
Flasher Location
Years Platform Location Photo
2012 S/X Under the seat below the fuse block. 2012S-obdii-port-and-fuse-block.jpg
2013+ X Behind the right fairing 2013-fx-flasher-relay.jpg
S In front of the front plastics area under the frame "wishbone" with other electrical connections. Tank-relay-connectors.jpg