Difference between revisions of "XMX Platform/Tail Subassembly Removal"

From Unofficial Zero Manual
Jump to: navigation, search
(Created page with "<onlyinclude> This removes the Tail subassembly on the XMX Platform. ;Tools * 7mm hex socket with extension. * 8mm hex socket. ;Steps # XM...")
 
(No difference)

Latest revision as of 02:33, 20 January 2020

This removes the Tail subassembly on the XMX Platform.

Tools
  • 7mm hex socket with extension.
  • 8mm hex socket.
Steps
  1. Remove the seat.
  2. Remove the 4 bolts - nut on top is 8 mm, bottom of bolt is 7mm.
    FX Tail Bolts (top)FX Tail Bolts (bottom)
    The front left bolt has the grounding strap on it.
    The rear bolts are recessed inside the plastic of the tail and don't have much profile, so they can be more difficult to engage.
References