Bitron Throttle

From Unofficial Zero Manual
Jump to: navigation, search

2015+ models use a new HAL-based (Hall-effect active device) sensor from Bitron which can't be replaced easily by Domino or similar

Product reference: Bitron HAL-based throttle
Via Keith's investigation
8 wire output, bundled into two pairs of 3 wires for potentiometer outputs.
Sumitomo connector 6188-0779
Sumitomo connector 6189-1240
The hall-effect sensor may be a potentiometer wired up as a voltage divider as follows:
Measured voltages
Wire Twist Voltage
Brown None 0.5
Full 4.5
Brown/Red None 4.5
Full 0.5