From Unofficial Zero Manual
Zero models all have an OBD-II port that is reasonably accessible for troubleshooting, diagnostics, and data collection.
Its wiring is non-standard; to connect, we offer the following references:
- How to build a cable to access the MBB for how to build a cable to work with it.
- The aftermarket section on OBD-II solutions.
|S||2011-2012||In the tank area facing the forward frame join where the fuse block sits.|
|SDS||2013||Above and behind the motor next to the accessory charging port, on the left-hand side.||difficult to photograph|
|2014-2015||Above and behind the motor next to the accessory charging port, on the right-hand side.||difficult to photograph|
|2016+||Under the seat on the left side just behind frame bulkhead that the tank plastics rest on for 2016 models.|
|XMX||2011+||Under the left side tank plastics.|
|FST||2020+||Inside the tank storage compartment|