Changes

Jump to: navigation, search

Controller Uncovering

6 bytes added, 07:00, 2 August 2018
m
no edit summary
This uncovers the [[Unofficial Service Manual#Controller|Sevcon controller]].
 
<onlyinclude>
;Prerequisites
* [[Seat Removal|Remove the seat]]
 
;Tools
* Small Philips-head screwdriver (PH1)
# Use the Philips head screwdriver to unfasten the rear end of the sheet just aft of the controller in the tail.
# Pull up carefully to raise the edges out from under the tail frame's side rails.
# The (Optional) Wind the forward section of the plastic sheet hooks counterclockwise around the wiring connecting to the controller's AMPSeal 34-pin connector at front; usually this can remain in place but it can be removed by winding it counterclockwise, pulling on the left as it is removed.
</onlyinclude>
[[Category:Procedure]]
[[Category:Teardown]]

Navigation menu