Jump to: navigation, search

SDS Platform/Belly Pan

15 bytes removed, 03:23, 12 July 2020
** 20.5in length from forward bevel lip to trailing edge below the motor.** 14.5in length along the flat base.** 2.25in length along forward bevel.** 10.25in width at the vertical outside face.
** 10.25in at the vertical outside face.** 11 15/16in width edge to edgeof the flange facing the frame.
** 2.5in height from frame-facing edge to the bottom edge (not counting louver overhang).
** 1in height 45° bevel.
** 3mm thick for the DS/DSR metallic pan.
;Drop bar Mounts

Navigation menu