Gen2/Implement Variable Regen

From Unofficial Zero Manual
< Gen2(Redirected from Variable Regen)
Jump to: navigation, search
Goal
Variable Regen is an attractive feature that the Sevcon controller can implement but Zero doesn't deliver in their Gen2 platform models.
Steps
  1. Install a connection into an unused analog input on the SevCon controller's 35-pin AMPSeal connector.
    Use Sevcon's DVT software to configure the software to read it and map it appropriately.
  2. Install a handle or switch to control the regen.
    Mount a handle or switch that provides a variable voltage output on the handlebar.
    Wire it up and amplify or tune the sensor to match the input requirements.
References
Related