5,366
edits
Changes
no edit summary
=Theory and Explanations=
==Torque Measurement==
Via [http://electricmotorcycleforum.com/boards/index.php?topic=6945.msg56912#msg56912 Re: 2016 FXS 77 ft-lbs torque in app]:
Torque (in Nm), is calculated by the controller.
* Inside the controller you have a "max torque" number for the motor, and you have a "max discharge" number in Amps for the battery.
*: There is no force sensor.
* It simply looks at amps / voltage drawn divided by rpm and the gear ratio
*: If the torque displayed is at:
*:* ''the motor's shaft'', then the controller only is likely the number used.
*:* ''the wheel'', then the controller number likely goes through the MBB or the app itself before the app as it needs to apply a gear ratio which isn't used inside the controller.
* Now, the max discharge rate is a RDPO variable sent from the firmware on the bike.
*: This sets the limit programmatically by zero and overwrites changes to the controller.
*: People who modify these settings have to fill in this data with dummy data so it is still "addressed" but not used by the controller.
*: This means if zero changes them via firmware updates they will propagate to the controller via these RDPO values.
==Battery Voltage VS SoC Display==
[http://electricmotorcycleforum.com/boards/index.php?topic=6975 Why voltage needs to be on the app] follows [http://electricmotorcycleforum.com/boards/index.php?topic=6950.msg57162#msg57162 Re: Limp mode at 25%] from Electric Terry.
==Fasteners==
Shadow says:
* All fasteners by name and torque (or other) specification from all model year user manuals and any available service manuals, with citation for where information comes from.
*: Additional addendum to this for filling in the missing information with common sense and educated guesses.
*: This can then be referenced throughout the site.
*: I'll take this on (slow and steady) for Zero Motorcycles and when it is nearer to being complete there will be a call out to owners for their measures and descriptions of fasteners for the addendum.
=Howto's=
==What procedures do people want to see?==
==Torque Measurement==
Via [http://electricmotorcycleforum.com/boards/index.php?topic=6945.msg56912#msg56912 Re: 2016 FXS 77 ft-lbs torque in app]:
Torque (in Nm), is calculated by the controller.
* Inside the controller you have a "max torque" number for the motor, and you have a "max discharge" number in Amps for the battery.
*: There is no force sensor.
* It simply looks at amps / voltage drawn divided by rpm and the gear ratio
*: If the torque displayed is at:
*:* ''the motor's shaft'', then the controller only is likely the number used.
*:* ''the wheel'', then the controller number likely goes through the MBB or the app itself before the app as it needs to apply a gear ratio which isn't used inside the controller.
* Now, the max discharge rate is a RDPO variable sent from the firmware on the bike.
*: This sets the limit programmatically by zero and overwrites changes to the controller.
*: People who modify these settings have to fill in this data with dummy data so it is still "addressed" but not used by the controller.
*: This means if zero changes them via firmware updates they will propagate to the controller via these RDPO values.
==Battery Voltage VS SoC Display==
[http://electricmotorcycleforum.com/boards/index.php?topic=6975 Why voltage needs to be on the app] follows [http://electricmotorcycleforum.com/boards/index.php?topic=6950.msg57162#msg57162 Re: Limp mode at 25%] from Electric Terry.
==Fasteners==
Shadow says:
* All fasteners by name and torque (or other) specification from all model year user manuals and any available service manuals, with citation for where information comes from.
*: Additional addendum to this for filling in the missing information with common sense and educated guesses.
*: This can then be referenced throughout the site.
*: I'll take this on (slow and steady) for Zero Motorcycles and when it is nearer to being complete there will be a call out to owners for their measures and descriptions of fasteners for the addendum.
=Howto's=
==What procedures do people want to see?==