5,366
edits
Changes
finally fixed the CF13 vs CF14 confusion
<onlyinclude>
The turn signal ("blinker") flasher is a simple three prong flasher relay.
: It's attached directly by a plug so is easily replaced if it fails (or for an LED compatible unit).
;Label
Flasher Unit 12V
2x10W
PN: 8078
Made by Ecie Cheng Du
''or''
GUILERA
Flasher Unit 12V
10+10W+1,2W
P.N. 013341
;Low Noise Revision
: As of 2016, the part is [http://www.af1racing.com/store/Scripts/prodView.asp?idProduct=89625 revised with the description "low noise"].
:: This suggests reduced electronic and/or audible noise.
:: This model of flasher relay is noticeably quieter, and that year coincides with reports from Zero management of EU EMF/EMC noise compliance expenditures.
;Silent Revision
: As of 2020?, the part is from the manufacturer Guilera and makes no audible noise.
:: This again suggests reduced electronic noise, again likely as a result of EU EMF/EMC noise compliance expenditures.
;Wiring
: The orientation is specific. Reversing the (+) and (-) wiring may be necessary if you buy the wrong orientation of relay.
: Look at the pins with the middle '''L''' (center)(Load) pin on top and the '''B''' and '''E''' below it to each side.
* '''2018+:''' The orientation should be '''E (-)''' (left), '''L''' (center/top), then '''B (+)''' (right).
*: Ref. [https://www.electricmotorcycleforum.com/boards/index.php?topic=9780 report from a 2019S owner]
*: This orientation is know as a '''CF14''' relay [http://electricmotorcycleforum.com/boards/index.php?topic=8751.0 per pacificcricket]
* '''2013-2017:'''
*: The orientation should be '''B (+)''' (left), '''L''' (center/top), then '''E (-)''' (right)
*: This orientation is know as a '''CF13''' relay
{| class="wikitable"
|+[http://electricmotorcycleforum.com/boards/index.php?topic=4604.msg31183#msg31183 Flasher Location]
!Years
!Platform
!Location
!Photo
|-
|2012
|S/X
|Under the seat below the fuse block.
|[[File:2012S-obdii-port-and-fuse-block.jpg|200px]]
|-
|rowspan="2"|2013+
|X
|Behind the right fairing
|[[File:2013-fx-flasher-relay.jpg|200px]]
|-
|S
|In front of the front plastics area under the frame "wishbone" with other electrical connections.
|[[File:Tank-relay-connectors.jpg|200px]]
|}
</onlyinclude>
[[Category:12V Component]]
The turn signal ("blinker") flasher is a simple three prong flasher relay.
: It's attached directly by a plug so is easily replaced if it fails (or for an LED compatible unit).
;Label
Flasher Unit 12V
2x10W
PN: 8078
Made by Ecie Cheng Du
''or''
GUILERA
Flasher Unit 12V
10+10W+1,2W
P.N. 013341
;Low Noise Revision
: As of 2016, the part is [http://www.af1racing.com/store/Scripts/prodView.asp?idProduct=89625 revised with the description "low noise"].
:: This suggests reduced electronic and/or audible noise.
:: This model of flasher relay is noticeably quieter, and that year coincides with reports from Zero management of EU EMF/EMC noise compliance expenditures.
;Silent Revision
: As of 2020?, the part is from the manufacturer Guilera and makes no audible noise.
:: This again suggests reduced electronic noise, again likely as a result of EU EMF/EMC noise compliance expenditures.
;Wiring
: The orientation is specific. Reversing the (+) and (-) wiring may be necessary if you buy the wrong orientation of relay.
: Look at the pins with the middle '''L''' (center)(Load) pin on top and the '''B''' and '''E''' below it to each side.
* '''2018+:''' The orientation should be '''E (-)''' (left), '''L''' (center/top), then '''B (+)''' (right).
*: Ref. [https://www.electricmotorcycleforum.com/boards/index.php?topic=9780 report from a 2019S owner]
*: This orientation is know as a '''CF14''' relay [http://electricmotorcycleforum.com/boards/index.php?topic=8751.0 per pacificcricket]
* '''2013-2017:'''
*: The orientation should be '''B (+)''' (left), '''L''' (center/top), then '''E (-)''' (right)
*: This orientation is know as a '''CF13''' relay
{| class="wikitable"
|+[http://electricmotorcycleforum.com/boards/index.php?topic=4604.msg31183#msg31183 Flasher Location]
!Years
!Platform
!Location
!Photo
|-
|2012
|S/X
|Under the seat below the fuse block.
|[[File:2012S-obdii-port-and-fuse-block.jpg|200px]]
|-
|rowspan="2"|2013+
|X
|Behind the right fairing
|[[File:2013-fx-flasher-relay.jpg|200px]]
|-
|S
|In front of the front plastics area under the frame "wishbone" with other electrical connections.
|[[File:Tank-relay-connectors.jpg|200px]]
|}
</onlyinclude>
[[Category:12V Component]]
