1
edit
Changes
m
Turn the set screw clockwise to aim the headlamp down, counterclockwise to aim it up.
<onlyinclude>
: [[File:lsl-urban-headlight.png|right|thumb|link=https://spieglerusa.com/lights-indicators/headlights-by-lsl/urban-headlight-kits/lsl-headlight-chrome-3290.htm|2013+ LSL Urban Headlight]][[File:lsl-urban-headlight-rear.png|right|thumb|link=https://spieglerusa.com/lights-indicators/headlights-by-lsl/urban-headlight-kits/lsl-headlight-chrome-3290.htm|2013+ LSL Urban Headlight (rear)]]
; Pre-2012
: Hella circular reflector unit (possibly [http://www.myhellalights.com/index.php/products/auxiliary-lamps/sealed-beam-conversion-headlamps/vision-plus-5-75in-conversion-headlamp/ the Vision Plus 5¾" conversion headlamp]).
; 2012+
: For 2012+ models, the Zero's stock headlamp assembly is the [https://spieglerusa.com/lights-indicators/headlights-by-lsl/urban-headlight-kits/lsl-headlight-chrome-3290.htm LSL Urban Headlight] with an H4 bulb in a 9003 / HB2 socket, and a W3W stock running light.
: LSL Urban headlight housing dimensions: 190mm width, 260mm height, 125mm depth.
: The headlamp housing OEM is by TRIOM with part number T7869010. It can be bought on the Italian market (ebay.it or amazon.it or such) for $100 instead of $160 in the US.
; Power
: The stock headlamp draws about 55/60W which is the largest regular 12V electrical load by default.
: The electrical load doesn't impact range much (110Wh over 2 hours compared to 11+kWh yields 1% range difference), ''unless'' you ride a very slow long travel leg for, say, offroading.
: However, it does heat up the housing glass.
; Bulb Retainer
: The headlight is fastened in by a plastic bracket that locks when rotated, and covered with a rubber boot to protect from moisture.
; [[../Headlamp Removal|Removal]]
{{:SDS Platform/Headlamp Removal}}
; [[../Headlamp Bulb Replacement|Bulb Replacement]]
{{:SDS Platform/Headlamp Bulb Replacement}}
; [[../Running Light Replacement|Running Lamp Replacement]]
{{:SDS Platform/Running Light Replacement}}
; Adjusting angle (2013+)
: There is a set screw on the upper-right rear face of the headlamp housing to adjust the angle of illumination.
: Adjust this while the bike is sitting fully upright.
: Remove the lower screws and swing the headlamp on the two upper bolts to access the screw while adjusting.
: Turn the set screw clockwise to aim the headlamp down, counterclockwise to aim it up.
</onlyinclude>
[[Category:12V Component]]
: [[File:lsl-urban-headlight.png|right|thumb|link=https://spieglerusa.com/lights-indicators/headlights-by-lsl/urban-headlight-kits/lsl-headlight-chrome-3290.htm|2013+ LSL Urban Headlight]][[File:lsl-urban-headlight-rear.png|right|thumb|link=https://spieglerusa.com/lights-indicators/headlights-by-lsl/urban-headlight-kits/lsl-headlight-chrome-3290.htm|2013+ LSL Urban Headlight (rear)]]
; Pre-2012
: Hella circular reflector unit (possibly [http://www.myhellalights.com/index.php/products/auxiliary-lamps/sealed-beam-conversion-headlamps/vision-plus-5-75in-conversion-headlamp/ the Vision Plus 5¾" conversion headlamp]).
; 2012+
: For 2012+ models, the Zero's stock headlamp assembly is the [https://spieglerusa.com/lights-indicators/headlights-by-lsl/urban-headlight-kits/lsl-headlight-chrome-3290.htm LSL Urban Headlight] with an H4 bulb in a 9003 / HB2 socket, and a W3W stock running light.
: LSL Urban headlight housing dimensions: 190mm width, 260mm height, 125mm depth.
: The headlamp housing OEM is by TRIOM with part number T7869010. It can be bought on the Italian market (ebay.it or amazon.it or such) for $100 instead of $160 in the US.
; Power
: The stock headlamp draws about 55/60W which is the largest regular 12V electrical load by default.
: The electrical load doesn't impact range much (110Wh over 2 hours compared to 11+kWh yields 1% range difference), ''unless'' you ride a very slow long travel leg for, say, offroading.
: However, it does heat up the housing glass.
; Bulb Retainer
: The headlight is fastened in by a plastic bracket that locks when rotated, and covered with a rubber boot to protect from moisture.
; [[../Headlamp Removal|Removal]]
{{:SDS Platform/Headlamp Removal}}
; [[../Headlamp Bulb Replacement|Bulb Replacement]]
{{:SDS Platform/Headlamp Bulb Replacement}}
; [[../Running Light Replacement|Running Lamp Replacement]]
{{:SDS Platform/Running Light Replacement}}
; Adjusting angle (2013+)
: There is a set screw on the upper-right rear face of the headlamp housing to adjust the angle of illumination.
: Adjust this while the bike is sitting fully upright.
: Remove the lower screws and swing the headlamp on the two upper bolts to access the screw while adjusting.
: Turn the set screw clockwise to aim the headlamp down, counterclockwise to aim it up.
</onlyinclude>
[[Category:12V Component]]
