5,366
edits
Changes
m
BrianTRice moved page Rear Axle Removal to Gen2/Rear Axle Removal
<onlyinclude>
This removes the [[Rear Axle]] part of [[Rear Wheel Removal]].
; Tools
* 27mm socket
* Breaker bar
; Instructions
# Place the motorcycle on a [[Lift|lift or rear stand]]
#: Raise just enough that the rear wheel spins freely.
# Mark/photograph where the alignment marks reside on each side of the axle for re-alignment when re-installing the wheel.
# On the right side, loosen the rear axle nut (27mm) with the breaker bar.
# Remove the rear axle nut.
# Pull the axle part-way out so that the wheel can be moved forward enough to loosen the belt.
# Pull the belt off of the rear sprocket.
#: Let it hang outside of the swingarm slightly to avoid interfering with the wheel.
# From the left side, pull the axle through the wheel.
</onlyinclude>
[[Category:Procedure]]
[[Category:Teardown]]
This removes the [[Rear Axle]] part of [[Rear Wheel Removal]].
; Tools
* 27mm socket
* Breaker bar
; Instructions
# Place the motorcycle on a [[Lift|lift or rear stand]]
#: Raise just enough that the rear wheel spins freely.
# Mark/photograph where the alignment marks reside on each side of the axle for re-alignment when re-installing the wheel.
# On the right side, loosen the rear axle nut (27mm) with the breaker bar.
# Remove the rear axle nut.
# Pull the axle part-way out so that the wheel can be moved forward enough to loosen the belt.
# Pull the belt off of the rear sprocket.
#: Let it hang outside of the swingarm slightly to avoid interfering with the wheel.
# From the left side, pull the axle through the wheel.
</onlyinclude>
[[Category:Procedure]]
[[Category:Teardown]]