5,366
edits
Changes
m
BrianTRice moved page System Warning Sequences to Gen2/System Warning Sequences
<onlyinclude>
This is a quick lookup for the red sequences flashed by the [[Gen2/Instrument Cluster|dash]] System Warning Indicator (a red triangle with an exclamation mark within it).
: These are derived from the [[Official Owners Manual]] only for roadside reference and owner community annotations and links.
;Overview
: The red indicator light in the lower part of the display sometimes will flash a repeating sequence.
: The [[Official Owners Manual]] lists what they mean, usually related to system startup.
: Often enough, keying the bike off and on is the way to re-test.
;System Warning Troubleshooting
# Toggle the Instrument Cluster's Display A to show [[Error Codes]].
# Check the corresponding [[Error Codes]]
#: Some will be expected like ''kickstand down'' based on your context.
#: Focus on topical system errors related to the System Warning.
# Attempt a basic reboot:
## '''Charging:''' disconnect the external power source from the vehicle.
## Key the bike off.
## Wait several seconds or a minute in length depending on severity of the error.
## Key the bike on, checking for a normal startup sequence, contactors closing, and no errors.
# If the System Warning persists, ''and'' it is related to the BMS, perform a [[BMS Reset Procedure]] (soft and then hard reset).
# If the System Warning persists, attempt to extract MBB logs.
#: '''Urgent/Roadside:''' Email logs to yourself, then decode using [http://home.hasslers.net/zerologparser/log_parser.php a log parser].
#: '''Non-Urgent or Important:''' Email logs to Zero.
# If no clear resolution is at hand, contact Zero and/or your local dealer to schedule servicing.
{| class="wikitable"
|+ Warning Blink Sequences
!#
!Blinks
!Description
!Cause
!Guidance
|- id="1"
| rowspan="4"|[[#1|1]]
| ············ || Fast constantly
| Safety Override is Active
|-
| · · · · · · · · || Fast intermittently
| [[Gen2/Isolation Faults|BMS Isolation Fault]]
| Check the [[Gen2/Isolation Faults|BMS Isolation Fault]] section of the manual
: Moisture and/or dirt are the most likely culprits.
|-
| colspan="2"| — = 1 long
* Charge Indicator blinking fast constantly
* or all blinking dash segments
| Charger Not Charging
| Probably a CAN Error
: Unplug the bike and wait a minute to re-engage
|-
| — || 1 long
| Cutout switch engaged or [[Kickstand Switch]] Disabled
| Disengage the cutout switch and/or raise the kickstand.
|- id="2"
| [[#2|2]] || ·· || 2 short
| Self-test failed
|
|- id="1-3"
| [[#1-3|3]] || · ··· || 1 short, then 3 short
| [[Error Codes#1|High Throttle Disable]]
| The throttle signal is abnormally high or disconnected.
: See [[Error Codes#1|Error Code 1]]: Check [[Throttle|throttle]] rotation and connections.
|- id="1-4"
| [[#1-4|4]] || · ···· || 1 short, then 4 short
| [[Error Codes#27|Precharge Fail]]
| See [[Error Codes#27|Error Code 27]].
|- id="1-5"
| [[#1-5|5]] || · ····· || 1 short, then 5 short
| [[Error Codes#7|Low Power Pack Disable]]
| See [[Error Codes#7|Error Code 7]]: Battery voltage is too low to operate
: Charge ''slowly'' as soon as possible.
|- id="2-1"
| [[#2-1|6]] || ·· · || 2 short, then 1 short
| [[Main Contactor|Contactor]] Error
| See [[Error Codes]] related to the [[Main Contactor|Contactor]].
|- id="2-2"
| [[#2-2|7]] || ·· ·· || 2 short, then 2 short
| [[Onboard Charger|Charger]] Error
| See [[Error Codes]] related to the [[Onboard Charger|Charger]].
|- id="2-3"
| [[#2-3|8]] || ·· ··· || 2 short, then 3 short
| CAN Error
|
|- id="2-4"
| [[#2-4|9]] || ·· ···· || 2 short, then 4 short
| [[BMS]] [[Throttle|Throttle]] Disable
| See [[Error Codes]] related to the [[Throttle|Throttle]].
|- id="2-5"
| [[#2-5|10]] || ·· ····· || 2 short, then 5 short
| [[Error Codes#32|Module Variance Too High]]
| See [[Error Codes#32|Error Code 32]]
|- id="3-3"
| [[#3-3|11]] || ··· ··· || 3 short, then 3 short
| [[Error Codes#18|Battery Temperature Sensor Fault]]
| See [[Error Codes#18|Error Code 18]]: A temperature sensor failure reduces safety; arrange a dealer visit.
: Not ''urgent'' to fix unless other battery problems are apparent from logs/etc.
|- id="4-1"
| [[#4-1|12]] || ···· · || 4 short, then 1 short
| [[Error Codes#26|Contactor Welded]]
| See [[Error Codes#26|Error Code 26]]
|- id="4-3"
| [[#4-3|13]] || ···· ··· || 4 short, then 3 short
| [[Gen2/Motor Controller|Motor Controller]] Error
| See [[Error Codes]] related to the [[Gen2/Motor Controller|Controller]].
|- id="4-4"
| [[#4-4|14]] || ···· ···· || 4 short, then 4 short
| [[Error Codes#35|Loopback Error]]
| See [[Error Codes#35|Error Code 35]]
: Reconnect either an expected second battery module or Power Tank, if present.
: Otherwise, reconnect the blanking plug.
|- id="5-1"
| [[#5-1|15]] || ····· · || 5 short, then 1 short
| [[BMS]] Startup Error
|
|- id="5-2"
| [[#5-2|16]] || ····· ·· || 5 short, then 2 short
| [[BMS]] Internal Disable
|
|- id="5-3"
| [[#5-3|17]] || ····· ··· || 5 short, then 3 short
| [[BMS]] Internal Fault
|
|- id="5-5"
| [[#5-5|18]] || ····· ····· || 5 short, then 5 short
| Miscellaneous Error
|
|}
</onlyinclude>
[[Category:Diagnostics]]
[[Category:Quick Reference]]
[[Category:Indication]]
This is a quick lookup for the red sequences flashed by the [[Gen2/Instrument Cluster|dash]] System Warning Indicator (a red triangle with an exclamation mark within it).
: These are derived from the [[Official Owners Manual]] only for roadside reference and owner community annotations and links.
;Overview
: The red indicator light in the lower part of the display sometimes will flash a repeating sequence.
: The [[Official Owners Manual]] lists what they mean, usually related to system startup.
: Often enough, keying the bike off and on is the way to re-test.
;System Warning Troubleshooting
# Toggle the Instrument Cluster's Display A to show [[Error Codes]].
# Check the corresponding [[Error Codes]]
#: Some will be expected like ''kickstand down'' based on your context.
#: Focus on topical system errors related to the System Warning.
# Attempt a basic reboot:
## '''Charging:''' disconnect the external power source from the vehicle.
## Key the bike off.
## Wait several seconds or a minute in length depending on severity of the error.
## Key the bike on, checking for a normal startup sequence, contactors closing, and no errors.
# If the System Warning persists, ''and'' it is related to the BMS, perform a [[BMS Reset Procedure]] (soft and then hard reset).
# If the System Warning persists, attempt to extract MBB logs.
#: '''Urgent/Roadside:''' Email logs to yourself, then decode using [http://home.hasslers.net/zerologparser/log_parser.php a log parser].
#: '''Non-Urgent or Important:''' Email logs to Zero.
# If no clear resolution is at hand, contact Zero and/or your local dealer to schedule servicing.
{| class="wikitable"
|+ Warning Blink Sequences
!#
!Blinks
!Description
!Cause
!Guidance
|- id="1"
| rowspan="4"|[[#1|1]]
| ············ || Fast constantly
| Safety Override is Active
|-
| · · · · · · · · || Fast intermittently
| [[Gen2/Isolation Faults|BMS Isolation Fault]]
| Check the [[Gen2/Isolation Faults|BMS Isolation Fault]] section of the manual
: Moisture and/or dirt are the most likely culprits.
|-
| colspan="2"| — = 1 long
* Charge Indicator blinking fast constantly
* or all blinking dash segments
| Charger Not Charging
| Probably a CAN Error
: Unplug the bike and wait a minute to re-engage
|-
| — || 1 long
| Cutout switch engaged or [[Kickstand Switch]] Disabled
| Disengage the cutout switch and/or raise the kickstand.
|- id="2"
| [[#2|2]] || ·· || 2 short
| Self-test failed
|
|- id="1-3"
| [[#1-3|3]] || · ··· || 1 short, then 3 short
| [[Error Codes#1|High Throttle Disable]]
| The throttle signal is abnormally high or disconnected.
: See [[Error Codes#1|Error Code 1]]: Check [[Throttle|throttle]] rotation and connections.
|- id="1-4"
| [[#1-4|4]] || · ···· || 1 short, then 4 short
| [[Error Codes#27|Precharge Fail]]
| See [[Error Codes#27|Error Code 27]].
|- id="1-5"
| [[#1-5|5]] || · ····· || 1 short, then 5 short
| [[Error Codes#7|Low Power Pack Disable]]
| See [[Error Codes#7|Error Code 7]]: Battery voltage is too low to operate
: Charge ''slowly'' as soon as possible.
|- id="2-1"
| [[#2-1|6]] || ·· · || 2 short, then 1 short
| [[Main Contactor|Contactor]] Error
| See [[Error Codes]] related to the [[Main Contactor|Contactor]].
|- id="2-2"
| [[#2-2|7]] || ·· ·· || 2 short, then 2 short
| [[Onboard Charger|Charger]] Error
| See [[Error Codes]] related to the [[Onboard Charger|Charger]].
|- id="2-3"
| [[#2-3|8]] || ·· ··· || 2 short, then 3 short
| CAN Error
|
|- id="2-4"
| [[#2-4|9]] || ·· ···· || 2 short, then 4 short
| [[BMS]] [[Throttle|Throttle]] Disable
| See [[Error Codes]] related to the [[Throttle|Throttle]].
|- id="2-5"
| [[#2-5|10]] || ·· ····· || 2 short, then 5 short
| [[Error Codes#32|Module Variance Too High]]
| See [[Error Codes#32|Error Code 32]]
|- id="3-3"
| [[#3-3|11]] || ··· ··· || 3 short, then 3 short
| [[Error Codes#18|Battery Temperature Sensor Fault]]
| See [[Error Codes#18|Error Code 18]]: A temperature sensor failure reduces safety; arrange a dealer visit.
: Not ''urgent'' to fix unless other battery problems are apparent from logs/etc.
|- id="4-1"
| [[#4-1|12]] || ···· · || 4 short, then 1 short
| [[Error Codes#26|Contactor Welded]]
| See [[Error Codes#26|Error Code 26]]
|- id="4-3"
| [[#4-3|13]] || ···· ··· || 4 short, then 3 short
| [[Gen2/Motor Controller|Motor Controller]] Error
| See [[Error Codes]] related to the [[Gen2/Motor Controller|Controller]].
|- id="4-4"
| [[#4-4|14]] || ···· ···· || 4 short, then 4 short
| [[Error Codes#35|Loopback Error]]
| See [[Error Codes#35|Error Code 35]]
: Reconnect either an expected second battery module or Power Tank, if present.
: Otherwise, reconnect the blanking plug.
|- id="5-1"
| [[#5-1|15]] || ····· · || 5 short, then 1 short
| [[BMS]] Startup Error
|
|- id="5-2"
| [[#5-2|16]] || ····· ·· || 5 short, then 2 short
| [[BMS]] Internal Disable
|
|- id="5-3"
| [[#5-3|17]] || ····· ··· || 5 short, then 3 short
| [[BMS]] Internal Fault
|
|- id="5-5"
| [[#5-5|18]] || ····· ····· || 5 short, then 5 short
| Miscellaneous Error
|
|}
</onlyinclude>
[[Category:Diagnostics]]
[[Category:Quick Reference]]
[[Category:Indication]]
